AS-700, AS-710
AS-700, AS-710
AS-700, AS-710
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.1 General Safety Notes<br />
Caution!<br />
Please, read these notes with care.<br />
Save this manual for future reference.<br />
All notes and warnings found on the machine are to be followed.<br />
Installing the<br />
Machine<br />
Electrical<br />
Hazards<br />
Operating<br />
Safety<br />
Cleaning the<br />
Machine<br />
A safe, level position is necessary, when installing the machine.<br />
Injuries may be caused by tipping, rolling away or falling.<br />
The machine is to be protected from moisture.<br />
WARNING!<br />
This is a Class A device. This device may cause radio frequency<br />
disturbances in residential areas; in this case, the operator may<br />
be required to implement the necessary corrective measures.<br />
Depending upon the country-specific version, the digital<br />
PRINTER <strong>700</strong>/<strong>710</strong> may only be connected to either a voltage<br />
of 230 V/50 Hz or 115 V/60 Hz.<br />
The mains plug may only be connected with a socket having an<br />
installed protective contact! The protective effect may not be<br />
compromised by the use of an extension line without a protective<br />
grounding conductor. All interruptions of the protective grounding<br />
conductor, within or outside of the machine, are prohibited.<br />
The device is double pole fused! When fuse failure occurs, electrical<br />
machine parts can still carry voltage.<br />
When making the connection to the mains power, be aware of<br />
the connection values on the rating plate.<br />
Inspect the voltage setting on the device’s power supply unit.<br />
Run the power cords in such a way, that no-one may trip over<br />
them. Do not place any objects upon a power cord.<br />
When the machine is not in use over a long period of time, it<br />
should be disconnected from the power supply in order to avoid<br />
any damage in the event of a voltage surge.<br />
Protect the device from moisture. When moisture enters the machine,<br />
there is a danger of electrical shock.<br />
Never open the machine. For reasons of electrical safety, the<br />
machine should only be opened by authorized service personnel.<br />
Never put your hands inside the machine when it is running!<br />
The danger of injuries exists, through pulling in and crushing on<br />
the rotating rollers. In addition, keep long hair and parts of loose<br />
clothing far from the machine in operation.<br />
In order to prevent damage to the machine, only factory authorized<br />
accessory parts should be used.<br />
Prior to cleaning the machine, it should be disconnected from the<br />
mains outlet.<br />
When cleaning the machine, do not use liquid or spray cleaners,<br />
but only a cloth dampened with water.<br />
10