VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
TROUBLESHOOTING AND MAINTENANCE A<br />
Step 3. At rotating gobo wheel, rotate until required gobo/filter is accessible.<br />
Step 4. FOR GAGS OR GOBOS THAT DO NOT REQUIRE A CARRIER - Locate end of coiled<br />
spring which is fitted under carrier tab. Using hook and pick tool or small slotted<br />
screwdriver, push end of spring from under tab until it is free. Once free, remove entire<br />
coiled spring.<br />
Step 5. FOR GOBOS THAT ARE FITTED INTO THEIR OWN CARRIER - Remove gobo by<br />
pressing on side opposite of "O" Ring.<br />
Only For Gags or Gobos that do not require a carrier<br />
Spring<br />
Gobo<br />
Carrier<br />
Flat side<br />
Orient flat side to<br />
flat side of carrier<br />
Flat Locator<br />
Markers<br />
Free end of spring<br />
and then remove<br />
Figure A-9: Rotating Gobo Removal<br />
CAUTION: Do not touch gobos with bare fingers. Wear cotton gloves or other covering while<br />
replacing. Clean with glass cleaner and soft cloth if required.<br />
Step 6. Remove gobo.<br />
Step 7. Aligning flat side correctly and orienting “black” side of gobo toward front lens, install new<br />
gobo.<br />
Step 8. Re-install spring, ensuring it is fully secured under carrier tabs (for Gags or Gobos that do<br />
not require a carrier).<br />
Step 9. Re-install removable cover.<br />
02.9676.0019 A 05-January-2004 73<br />
Tab<br />
Spring