VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TROUBLESHOOTING AND MAINTENANCE A<br />
Note: In some cases it is easier to slide bulkhead partially out of head assembly to access color filters.<br />
To do this, use #2 Phillips screwdriver to turn captive screw one-quarter turn and slide bulkhead<br />
upward. Disconnect motor connections as necessary.<br />
Step 3. Remove CYM Color / Dimmer Assembly.<br />
Step 4. Rotate wheel until required color filter is accessible at finger access cutout.<br />
Color Filter<br />
Finger Access<br />
Cutout<br />
Figure A-3: Filter Access<br />
CAUTION: Do not touch color filters with bare fingers. Wear cotton gloves or other covering while<br />
replacing. Clean with glass cleaner and soft cloth if required.<br />
Step 5. Using fingers, pull color filter out of wheel.<br />
Step 6. Noting proper orientation of carrier indention,<br />
insert new color filter into position and push<br />
fully into place.<br />
Step 7. Re-install bulkheads and re-install removable<br />
cover.<br />
Color Filter<br />
Carrier Indention<br />
Color<br />
Filter Wheel<br />
Figure A-4: Color Filter Removal<br />
02.9676.0019 A 05-January-2004 69
Change language