VL2500 Spot User Manual - Production Services Ireland

More documents

Recommendations

Info

VARI❋LITE® - VL2500 SPOT LUMINAIRE USER’S MANUAL DMX Operation VL2500 Spot Channel Mapping These tables assume a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence. Figure 3-6: VL2500 Spot Luminaire Channel Mapping DMX Channel Parameters Range 1 Intensity 0 (closed) - 255 (open) 2 Pan Hi Byte 0 - 65535 3 Pan Lo Byte 4 Tilt Hi Byte 0 - 65535 5 Tilt Lo Byte 6 Cyan Mixer 0 (open) - 255 (full saturation) 7 Yellow Mixer 0 (open) - 255 (full saturation) 8 Magenta Mixer 0 (open) - 255 (full saturation) 9 Fixed Color Wheel 0 - 216 (index) / 217 - 255 (spins) 10 Edge 0 - 255 11 Strobe 0 (open) - 255 (maximum) 12 Zoom 0 (small) - 255 (wide) 13 Fixed Gobo Wheel 0 - 216 (index) / 217 - 255 (spins) 14 Rotating Gobo Wheel 0 - 108 (index) / 109 - 216 (rotating) / 217 - 255 (spins) 15 Index Hi Byte 0 - 65535 16 Index Lo Byte 17 Iris 0 (closed) - 255 (open) 18 F Time* 0 (fast) - 255 (proportional) 19 C Time* 0 (fast) - 255 (proportional) 20 B Time* 0 (fast) - 255 (proportional) 21 G Time* 0 (fast) - 255 (proportional) 22 Control* See "Control Channel Functions" on page 43. *Notes: Use of Timing Channels: The default value setting in the profile should be 255 (proportional control) to allow smooth movement when using console timing. The Timing channel data should change as a snap. A zero value will give the fastest move but without any smoothing, this can look steppy in console timed moves. To use a timing channel instead of console timing it is necessary to set the timing channel to the desired value and set cue and/or parameter time to zero. A combination of time controls can produce unexpected results. Refer to "Luminaire Timing" on page 36 for more information. Timing Channel Control: The luminaire uses the timing channel value to calculate a smooth continuous movement for a given time and transition Console Timing: The Console calculates the time duration between the DMX increments to be sent for a given time and transition. Timing Channel Mapping: Focus timing: Pan and Tilt Color timing: Cyan, Yellow, Magenta, and the Fixed Color Wheel. Beam timing: Zoom, Edge, and Iris. Gobo Timing: Gobo Wheels (Rotating and Fixed). Note, Index/Rotation and wheel spins channels are not mapped to a Timing Channel. 26 05-January-2004 02.9676.0019 A
DMX Mapping CYM Crossfade Color Mixing and Dimmer CYM Color Wheels Dimmer Wheel Fixed Color and Gobo Control Color/Gobo Wheels Table 3-4: DMX Map For CYM Crossfade Color Mixing % Value DMX Value Action 0 0 Open (White) 100 255 Closed (Full Saturation) Table 3-5: DMX Map For Dimmer % Value DMX Value Action 0 0 Closed 100 255 Open Table 3-6: DMX Map For Color/Gobo Wheels OPERATION : DMX MAPPING 3 % Value DMX (0-255) Color Wheel Gobo Wheel 0 0 1 2 Open Frame 1 1 3 4 2 5 6 7 3 8 Half Frame 9 Half Frame 4 10 11 12 5 13 14 02.9676.0019 A 05-January-2004 27
Page 2 and 3: VARI❋LITE ® is a trademark owned
Page 4 and 5: VARI❋LITE® - VL2500 SPOT LUMINAI
Page 92 and 93:
VARI❋LITE® - VL2500 SPOT LUMINAI
Page 94:
(This page intentionally blank.)
show all

VL2500 Spot User Manual - Production Services Ireland

Create successful ePaper yourself

Delete template?

Save as template?