VL2500 Spot User Manual - Production Services Ireland

VARI❋LITE® - VL2500 SPOT LUMINAIRE USER’S MANUAL
Color/Gobo Control
The VL2500 Spot Luminaire’s color system is composed of a CYM color mixing mechanism and a
fixed color wheel. The following sections describe these components.
CYM Crossfade Color Mixing and Dimmer
The color mixing mechanism is made up of three graduated color disks: Cyan, Yellow, and Magenta
(CYM). These disks provide full-spectrum color crossfades from pastel to saturated colors. Also
included on the color mixing bulkhead is a graduated glass dimmer wheel for smooth time-controlled
fades from full light output to absolute black.
CYM Crossfade
Color Bulkhead
Front Lens
Figure 3-1: CYM and Dimmer Bulkhead
Color/Gobo Wheel Positions
The standard configurations for color and fixed gobo wheels
are: all color filters installed on Wheel 1 (wheel nearest lamp)
and all gobos installed on Wheel 2 (wheel nearer to front lens).
These wheels each have 12 positions, one being open.
All rotating gobos are installed on the Rotating Gobo Wheel
(nearest to front lens). This wheel has six positions, one being
open.
Color and gobo wheels offer partial frame control and various
spin rates in either direction.
NOTE: Users of VARI❋LITE luminaires should not install or
use metal gobos. The use of metal gobos in any VARI❋LITE
product may damage the luminaire and could void the
luminaire’s warranty.
Cyan, Yellow, Magenta
and Dimmer Wheels
Front Lens
Wheel 2 - Gobos
Wheel 1 - Colors
(Behind plate)
Color/Gobo/Iris
Bulkhead
Figure 3-2: Color/Gobo Bulkhead
22 05-January-2004 02.9676.0019 A