VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL2500</strong> SPOT LUMINAIRE USER’S MANUAL<br />
Installing in Truss:<br />
Step 1. Using two people, lift luminaire into mounting position.<br />
Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g.<br />
wing bolt) is properly tightened and that luminaire is fully supported.<br />
Step 3. Attach safety cable (as required) as follows:<br />
a. Connect one end of cable to luminaire handle.<br />
b. Loop at least once around truss/pipe and attach other end of cable to other handle.<br />
Step 4. Connect power and data cables according to procedure given in “Connecting Data and<br />
Power” on page 17.<br />
*<br />
27.63”<br />
(70.18cm)<br />
Safety Cable:<br />
Recommended for hanging installations.<br />
May be required by local codes.<br />
**<br />
25.95”<br />
(65.91cm)<br />
18.80”<br />
(47.75cm)<br />
***<br />
18.80”<br />
(47.75cm)<br />
Figure 2-5: Hanging Dimensions and Clearances<br />
Note: Enclosure can be oriented in either<br />
direction. See Figure 2-3 for details.<br />
19”<br />
(48.3cm)<br />
Handles are<br />
approved for<br />
safety cable<br />
anchor points<br />
* From lens to top of bracket<br />
From lens to base of enclosure<br />
***<br />
Head Swing Diameter<br />
16 05-January-2004 02.9676.0019 A<br />
**