VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
VL2500 Spot User Manual - Production Services Ireland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL2500</strong> SPOT LUMINAIRE USER’S MANUAL<br />
Hanging the Luminaire<br />
The <strong>VL2500</strong> spot luminaire can be hung horizontally or vertically from any structure designed to work<br />
with the type of load created by this moving luminaire. Two mounting bracket assemblies (provided)<br />
are used to attach truss hooks or other mounting hardware as required. Many compatible truss hooks<br />
are available from different manufacturers for your particular needs.<br />
A minimum of one hook per truss hook bracket is required. If mounting method does not use truss<br />
hooks, two attachment points per truss hook bracket are required. When attaching more than one point<br />
on a single bracket, the attach points must be spaced as far apart as possible using the supplied<br />
mounting holes.<br />
Install mounting hardware and brackets:<br />
Step 1. Install truss hooks on two provided truss hook brackets as required.<br />
Bracket<br />
Truss Hook Hardware<br />
(not provided)<br />
Figure 2-2: Installing Truss Hooks<br />
Note: Various types of truss hooks can be used. The Mega Claw truss hook (as shown in the example<br />
above) as well as many other standard hooks, can be ordered separately.<br />
Step 2. Determine required configuration of bracket installation. Brackets may be installed in either<br />
orientation as shown.<br />
Bracket<br />
Figure 2-3: Bracket Orientation Options<br />
Mega Claw Truss Hook<br />
(not provided)<br />
Example Truss<br />
Hook Installation<br />
14 05-January-2004 02.9676.0019 A