Crocus SHDSL G703.pdf - FTP Directory Listing

22 Crocus SHDSL G703 Chapter 2
User manual
Installing and connecting the Crocus SHDSL G703
2.6.2 Connecting the power supply to the Table Top
The following table explains how to connect the power supply. The TT exists in two different models:
TT model Connector type Connecting the power supply
-48 Vdc 48 V power supply
connector
12 Vdc 12 V power supply
connector
For a -48 Vdc model, a power supply connector is delivered
with the Crocus SHDSL G703.The + and - indications are with
respect to each other, not to ground level. This means that for
a standard -48 Vdc connection, the ground has to be connected
to +, while the negative voltage has to be connected to
the -.When the -48 Vdc power supply connector is wired, connect
it to the power inlet. Refer to Crocus SHDSL G703 RP on
page 21.
Insert the plug of the 12 Vdc power adapter in the 12 Vdc
power inlet.