Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703 Chapter 13 265
User manual
Technical specifications
13.7 Control connector
The control connector (sometimes also called control port) is a 9 pins subD connector that is labelled
CTRL. The signals on this connector are V.24 / V.28 signals.
The control connector layout
The control connector has the following pin layout:
Pin Signal DCE Figure
1 not used -
2 NMS RxD output
3 NMS TxD input
4 not used -
5 GND -
6 not used -
7 not used -
8 not used -
9 not used -
Table Top
• The connection with the computer running TMA can be made with a straight 9 pins subD (Male/
Female) cable or a regular 25/9 pins subD adapter cable.
• The cable which is used to connect the TT with the 1035 Orchid LAN management concentrator can
be ordered at the distributor (code 149220).