Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703 Chapter 11 243
User manual
Software download
11.5 Downloading in loader mode
When a download of application software has failed or when a flash memory error occurs, the Crocus
SHDSL G703 normally remains in loader mode. In other words, you can immediately retry to download
the application software again.
However, it may be possible that the application software becomes corrupt making the Crocus SHDSL
G703 inoperative and inaccessible to TMA. In that case, new application software can still be downloaded
by forcing the Crocus SHDSL G703 in loader mode using a DIP switch (refer to 3.1.2 - DIP
switches of the TT on page 36.
To download application software to a Crocus SHDSL G703 in loader mode, proceed as follows:
Step
Action
1 Disconnect the Crocus SHDSL G703 from the power supply.
2 Set DIP switch bank DS1 position 2 to off.
To locate this DIP switch bank and for the DIP switch setting procedure, refer to 3 - DIP
switches and straps of the Crocus SHDSL G703 on page 33.
3 Reconnect the power supply to the Crocus SHDSL G703.
⇒The Crocus SHDSL G703 is now in loader mode.
4 Now proceed as explained in 11.4 - Downloading with TML on page 242.
5 When the download is finished, disconnect the Crocus SHDSL G703 from the power supply
again.
6 Reset DIP switch bank DS1 position 2 to on.
7 Reconnect the power supply to the Crocus SHDSL G703.