Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703.pdf - FTP Directory Listing Crocus SHDSL G703.pdf - FTP Directory Listing

oneaccess.net.com
from oneaccess.net.com More from this publisher
30.12.2014 Views

196 Crocus SHDSL G703 Chapter 8 Reference manual Performance attributes 8.4 Line pair performance attributes This section describes the following performance attributes: • crocusShdslTtRpG703/line/linePair[ ]/LineParameters on page 197 • crocusShdslTtRpG703/line/linePair[ ]/lineParameters on page 197 • crocusShdslTtRpG703/line/linePair[ ]/Performance on page 198 • crocusShdslTtRpG703/line/linePair[ ]/performance on page 198 In case of a Crocus SHDSL G703 2P, two linePair objects are present: linePair [1] and linePair [2].

Crocus SHDSL G703 Chapter 8 197 Reference manual Performance attributes crocusShdslTtRpG703/line/linePair[ ]/LineParameters This structured value displays the 2 hours, 24 hours and 7 days line pair parameters. The LineParameters structured value elements are the following: Element sysUpTime lineAttenuationMin (dB) lineAttenuationMax (dB) lineAttenuationAvrg (dB) signalNoiseMin (dB) signalNoiseMax (dB) signalNoiseAvrg (dB) For the corresponding period, this value displays … the elapsed time since the last cold boot. the minimum line attenuation that was measured. the maximum line attenuation that was measured. the average line attenuation that was calculated. the minimum signal to noise ratio that was measured. the maximum signal to noise ratio that was measured. the average signal to noise ratio that was calculated. crocusShdslTtRpG703/line/linePair[ ]/lineParameters This structured value displays the line pair parameters since the last cold boot. Except for sysUpTime, the structured value elements are the same as for the LineParameters attribute.

<strong>Crocus</strong> <strong>SHDSL</strong> G703 Chapter 8 197<br />

Reference manual<br />

Performance attributes<br />

crocusShdslTtRpG703/line/linePair[ ]/LineParameters<br />

This structured value displays the 2 hours, 24 hours and 7 days line pair parameters. The LineParameters structured value elements are the following:<br />

Element<br />

sysUpTime<br />

lineAttenuationMin (dB)<br />

lineAttenuationMax (dB)<br />

lineAttenuationAvrg (dB)<br />

signalNoiseMin (dB)<br />

signalNoiseMax (dB)<br />

signalNoiseAvrg (dB)<br />

For the corresponding period, this value displays …<br />

the elapsed time since the last cold boot.<br />

the minimum line attenuation that was measured.<br />

the maximum line attenuation that was measured.<br />

the average line attenuation that was calculated.<br />

the minimum signal to noise ratio that was measured.<br />

the maximum signal to noise ratio that was measured.<br />

the average signal to noise ratio that was calculated.<br />

crocusShdslTtRpG703/line/linePair[ ]/lineParameters<br />

This structured value displays the line pair parameters since the last cold boot. Except for sysUpTime, the<br />

structured value elements are the same as for the LineParameters attribute.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!