Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703 Chapter 7 179
Reference manual
Status attributes
crocusShdslTtRpG703/end/linePair[ ]/lineAttenuation
This attribute is only retrieved in case the eocHandling attribute is set to info or alarmConfiguration.
This attribute displays the line attenuation, in dB, as it is measured on the line pair of the repeater or end
device.
crocusShdslTtRpG703/end/linePair[ ]/signalNoise
This attribute is only retrieved in case the eocHandling attribute is set to info or alarmConfiguration.
This attribute displays the noise margin, in dB, as it is measured on the line pair of the repeater or end
device.
crocusShdslTtRpG703/repeater/loopbackActivation
This action is only present in the repeater[ ] object.
Use this action to set up a loop at the network side of the Crocus SHDSL Repeater:
Set the loop by selecting the action argument value initiateNetworkLoopback and executing the action (double-click
the loopbackActivation string). Stop the loop by selecting the action argument value clearAllMaintenanceStates
and executing the action (double-click the loopbackActivation string).
Important remarks
• You can only set up a loop at the network side of the Crocus SHDSL Repeater. Not at the customer
side.
• You can only start the loopbackActivation action on the central device. Not on the remote device.
• You can only start the loopbackActivation action in case the line/eocHandling attribute is set to alarmConfiguration.
• The loopbackActivation action argument value noAction does nothing. It is only present to have a default
value.
.