Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703 Chapter 7 171
Reference manual
Status attributes
crocusShdslTtRpG703/line/maximumSpeedSearch
Use this action to determine the highest possible line speed that can be achieved between the central
and remote Crocus SHDSL G703. Double click on the maximumSpeedSearch string to execute the action.
When you execute this test, the following happens:
Phase
Action
1 The Crocus SHDSL G703 interrupts the normal data transfer.
2 Both local and remote Crocus SHDSL G703 go to auto speed mode in order to determine
the highest possible line speed. Meanwhile, the status of the test can be monitored with
the maxSpeedSearch attribute.
3 When the test ends, the result is displayed by the maxSpeedResult attribute.
4 The Crocus SHDSL G703 resumes normal data transfer at the speed that was selected
before the test.
• The Crocus SHDSL G703 has to be in data state (i.e. after a successful training sequence and when
the data connection is up) before you can execute the maximumSpeedSearch action.
• While the maximumSpeedSearch action is running, no data transmission is possible.