Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703 Chapter 6 129
Reference manual
Configuration attributes
crocusShdslTtRpG703/Activate Configuration
If you execute this action, the editable non-active configuration becomes the active configuration.
When use this action
If you configure the Crocus SHDSL G703 using …
• any other maintenance tool than the graphical user interface based TMA (e.g. ATWIN, CLI, Web
Interface, EasyConnect terminal, TMA CLI), then execute the Activate Configuration action to activate
the configuration after you finished configuring the Crocus SHDSL G703 or after you executed
the Load Saved Configuration or Load Default Configuration action.
• TMA, then do not just execute the Activate Configuration action to activate the configuration after you finished
configuring the Crocus SHDSL G703, but use the TMA button Send all attributes to device
instead. You can, however, execute the Activate Configuration action after you executed the Load
Saved Configuration or Load Default Configuration action.
crocusShdslTtRpG703/Load Default Configuration
If you execute this action, the non-active configuration is overwritten by the default configuration.
When use this action
If you install the Crocus SHDSL G703 for the first time, all configuration attributes have their default values.
If the Crocus SHDSL G703 has already been configured but you want to start from scratch, then
use this action to revert to the default configuration.
In case of TMA, click on the TMA button Retrieve all attributes from device
Configuration action to see the new non-active configuration.
after executing the Load Default