Crocus SHDSL G703.pdf - FTP Directory Listing

Crocus SHDSL G703 Chapter 5 115
User manual
Step-by-step configuration
5.12.2 Activating the configuration
As explained in section 5.12.1 - What are the different configuration types on page 114, when you finished
configuring the Crocus SHDSL G703 you have to activate the configuration changes you made.
In case of …
• TMA, click on the TMA button Send all attributes to device: .
• any other maintenance tool than the graphical user interface based TMA (e.g. ATWIN, CLI, Web
Interface, EasyConnect terminal, TMA CLI), then execute the Activate Configuration action.
5.12.3 Loading the default configuration
If you install the Crocus SHDSL G703 for the first time, all configuration attributes have their default values.
If the Crocus SHDSL G703 has already been configured but you want to start from scratch, then
you can revert to the default configuration.
You can load the default configuration using the Load Default Configuration …
• action. Refer to 5.12.4 - The load default configuration action in TMA on page 116.
• DIP switch. Refer to 5.12.5 - Loading the default configuration using a DIP switch on page 117.