Crocus SHDSL G703.pdf - FTP Directory Listing
Crocus SHDSL G703.pdf - FTP Directory Listing Crocus SHDSL G703.pdf - FTP Directory Listing
98 Crocus SHDSL G703 Chapter 5 User manual Step-by-step configuration 5.9 Configuring the interface specific attributes crocusShdslTtRpG703/g703/coding Use the coding attribute to set the G703 interface encoding mode. Possible values are: Default:hdb3 Range: ami / hdb3 Value ami hdb3 Description Alternate Mark Inversion is selected. This is a bipolar code with no zero substitution. High Density Bipolar 3 is selected. This is a modified bipolar code.With HDB3 encoding, more than three consecutive zeroes occurring in the data are replaced by a substitution word. This to ensure a high pulse density. Therefore, data links using the HDB3 code can carry data patterns with a low 1 density. Most of the G703 applications use HDB3 encoding. crocusShdslTtRpG703/g703/crc4Insertion This attribute is only relevant in framed mode. Use the crc4Insertion attribute to determine whether the CRC-4 (cyclic redundancy check) is recalculated before sending it to the interface. The CRC is used to check the data integrity on the G.703 connection. The crc4Insertion attribute has the following possible values: Default:auto Range: enumerated, see below Value auto disabled enabled Description In auto mode, CRC-4 insertion is …· • disabled if the data is unframed,· • enabled if the data is G.704 framed. CRC-4 insertion is disabled. CRC-4 insertion is enabled.
Crocus SHDSL G703 Chapter 5 99 User manual Step-by-step configuration 5.10 Configuring the management attributes This section explains the management attributes of the Crocus SHDSL G703. These attributes allow you to make all the devices in your network accessible for management from one central location. First this section gives you some rules of thumb and remarks concerning the management of the Crocus SHDSL G703 in a network. Then it explains the attributes that have an impact on the management of the Crocus SHDSL G703. Finally, it gives some examples of networks and how to configure the Crocus SHDSL G703 to make it accessible for the central management system. The following gives an overview of this section: • 5.10.1 - Rules of thumb and remarks concerning management on page 100 • 5.10.2 - Using relative or absolute addressing on page 101 • 5.10.3 - Selecting the purpose of the control connector on page 102 • 5.10.4 - Forwarding management data to the line and control connector on page 103 • 5.10.5 - Configuring the management data on the line on page 105 • 5.10.6 - Configuring the management data on a G703 interface on page 106 • 5.10.7 - Example - management over the line and the control port on page 107 • 5.10.8 - Example - management over the line and the E1 interface on page 109
- Page 59 and 60: Crocus SHDSL G703 Chapter 4 47 User
- Page 61 and 62: Crocus SHDSL G703 Chapter 4 49 User
- Page 63 and 64: Crocus SHDSL G703 Chapter 4 51 User
- Page 65 and 66: Crocus SHDSL G703 Chapter 5 53 User
- Page 67 and 68: Crocus SHDSL G703 Chapter 5 55 User
- Page 69 and 70: Crocus SHDSL G703 Chapter 5 57 User
- Page 71 and 72: Crocus SHDSL G703 Chapter 5 59 User
- Page 73 and 74: Crocus SHDSL G703 Chapter 5 61 User
- Page 75 and 76: Crocus SHDSL G703 Chapter 5 63 User
- Page 77 and 78: Crocus SHDSL G703 Chapter 5 65 User
- Page 79 and 80: Crocus SHDSL G703 Chapter 5 67 User
- Page 81 and 82: Crocus SHDSL G703 Chapter 5 69 User
- Page 83 and 84: Crocus SHDSL G703 Chapter 5 71 User
- Page 85 and 86: Crocus SHDSL G703 Chapter 5 73 User
- Page 87 and 88: Crocus SHDSL G703 Chapter 5 75 User
- Page 89 and 90: Crocus SHDSL G703 Chapter 5 77 User
- Page 91 and 92: Crocus SHDSL G703 Chapter 5 79 User
- Page 93 and 94: Crocus SHDSL G703 Chapter 5 81 User
- Page 95 and 96: Crocus SHDSL G703 Chapter 5 83 User
- Page 97 and 98: Crocus SHDSL G703 Chapter 5 85 User
- Page 99 and 100: Crocus SHDSL G703 Chapter 5 87 User
- Page 101 and 102: Crocus SHDSL G703 Chapter 5 89 User
- Page 103 and 104: Crocus SHDSL G703 Chapter 5 91 User
- Page 105 and 106: Crocus SHDSL G703 Chapter 5 93 User
- Page 107 and 108: Crocus SHDSL G703 Chapter 5 95 User
- Page 109: Crocus SHDSL G703 Chapter 5 97 User
- Page 113 and 114: Crocus SHDSL G703 Chapter 5 101 Use
- Page 115 and 116: Crocus SHDSL G703 Chapter 5 103 Use
- Page 117 and 118: Crocus SHDSL G703 Chapter 5 105 Use
- Page 119 and 120: Crocus SHDSL G703 Chapter 5 107 Use
- Page 121 and 122: Crocus SHDSL G703 Chapter 5 109 Use
- Page 123 and 124: Crocus SHDSL G703 Chapter 5 111 Use
- Page 125 and 126: Crocus SHDSL G703 Chapter 5 113 Use
- Page 127 and 128: Crocus SHDSL G703 Chapter 5 115 Use
- Page 129 and 130: Crocus SHDSL G703 Chapter 5 117 Use
- Page 131 and 132: Crocus SHDSL G703 Chapter 5 119 Use
- Page 133 and 134: Crocus SHDSL G703 121 Reference man
- Page 135 and 136: Crocus SHDSL G703 Chapter 6 123 Ref
- Page 137 and 138: Crocus SHDSL G703 Chapter 6 125 Ref
- Page 139 and 140: Crocus SHDSL G703 Chapter 6 127 Ref
- Page 141 and 142: Crocus SHDSL G703 Chapter 6 129 Ref
- Page 143 and 144: Crocus SHDSL G703 Chapter 6 131 Ref
- Page 145 and 146: Crocus SHDSL G703 Chapter 6 133 Ref
- Page 147 and 148: Crocus SHDSL G703 Chapter 6 135 Ref
- Page 149 and 150: Crocus SHDSL G703 Chapter 6 137 Ref
- Page 151 and 152: Crocus SHDSL G703 Chapter 6 139 Ref
- Page 153 and 154: Crocus SHDSL G703 Chapter 6 141 Ref
- Page 155 and 156: Crocus SHDSL G703 Chapter 6 143 Ref
- Page 157 and 158: Crocus SHDSL G703 Chapter 6 145 Ref
- Page 159 and 160: Crocus SHDSL G703 Chapter 6 147 Ref
<strong>Crocus</strong> <strong>SHDSL</strong> G703 Chapter 5 99<br />
User manual<br />
Step-by-step configuration<br />
5.10 Configuring the management attributes<br />
This section explains the management attributes of the <strong>Crocus</strong> <strong>SHDSL</strong> G703. These attributes allow you<br />
to make all the devices in your network accessible for management from one central location.<br />
First this section gives you some rules of thumb and remarks concerning the management of the <strong>Crocus</strong><br />
<strong>SHDSL</strong> G703 in a network. Then it explains the attributes that have an impact on the management of<br />
the <strong>Crocus</strong> <strong>SHDSL</strong> G703. Finally, it gives some examples of networks and how to configure the <strong>Crocus</strong><br />
<strong>SHDSL</strong> G703 to make it accessible for the central management system.<br />
The following gives an overview of this section:<br />
• 5.10.1 - Rules of thumb and remarks concerning management on page 100<br />
• 5.10.2 - Using relative or absolute addressing on page 101<br />
• 5.10.3 - Selecting the purpose of the control connector on page 102<br />
• 5.10.4 - Forwarding management data to the line and control connector on page 103<br />
• 5.10.5 - Configuring the management data on the line on page 105<br />
• 5.10.6 - Configuring the management data on a G703 interface on page 106<br />
• 5.10.7 - Example - management over the line and the control port on page 107<br />
• 5.10.8 - Example - management over the line and the E1 interface on page 109