Download the apgwmsds - Ferrotec
Download the apgwmsds - Ferrotec
Download the apgwmsds - Ferrotec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
【SECTION 8】: EXPOSURE CONTROLS / PERSONAL PROTECTION<br />
a. Exposure Limit: No experience on over exposure.<br />
b. Engineering measurement: N/A<br />
c. Personal protection<br />
Respiratory protection: Not required.<br />
Ventilation: Not required.<br />
Hand protection: Rubber or plastic gloves to prevent prolonged or repeated contacting with skin.<br />
Eye Protection: Safety glasses.<br />
O<strong>the</strong>r Protective Equipment: Not required.<br />
【SECTION 9】: PHYSICAL AND CHEMICAL PROPERTIES<br />
Appearance: Brown and / or black fluid<br />
Odor: Mild faint<br />
Solubility: Stable<br />
Boiling Point( 0C): > 150<br />
Melting Point ( 0C): N/A<br />
Vapor Pressure (kPa at 20 0C): Negligible<br />
Percentage Volatiles: < 1<br />
Evaporation Rate : 1.5 – 2.8 X 10-7 g/cm2sec @175oC Vapor Density (Air=1): > 1<br />
Density (g/cm3 ) : 1.160 – 1.380<br />
Flash point: >200 o C<br />
Auto ignition temperature: N/A<br />
Flammable limit (% ): N/A<br />
O<strong>the</strong>r properties if applicable: N/D<br />
【SECTION 10】: STABILITY AND REACTIVITY<br />
Conditions to avoid: Pyrolysis<br />
Stability: Stable at normal temperatures and pressure.<br />
Material to avoid: Strong oxidizing material, heat and flame.<br />
Hazardous docomposition products: Burning may produce carbon monoxide and nitrogen oxide.<br />
Hazardous polymerization: will not occur<br />
<strong>Ferrotec</strong> (USA) Corp. | MSDS APG W Series Rev B1 – August 2008 3
Change language