BRIDGE 4400 CAN

30
11 - ARM AND DISARM CONTROLS.
11.1 - Arming of system using vehicle’s original remote control (all
versions).
When the Close button of the original remote control is pressed:
- the doors lock,
- the buzzer function is disabled, can be enabled only in
non-EU states,
- the LED lights up steady for the first 25 s, then blinks;
- the protections become active when the LED starts
blinking.
11.2 - Arming of system with Cobra radio control (versions
442x,443x, 4485).
When radiocontrol button “A” Cobra is pressed:
- the doors lock ,
- the buzzer function is disabled, can be
enabled only in non-EU states.
11.3 - Arming of system with voluntary disarming of volumetric
sensor and external sensors.
The voluntary disarming of the volumetric sensor occurs when
the following procedure is carried out:
1. Press the button on the control panel
within 5 s after dashboard switch - off.
2. Keep the button on the control panel
pressed until the LED signals:
B
A
• with 1 flash that the system’s volumetric sensor has been
disabled.
• with 2 flashes that the system’s volumetric sensor has been
disabled together with any additional modules (connected to
the modules input).
11.4 - Disarming of system using the vehicle’s original remote
control (all versions).
When the Open button of the original remote control is pressed:
- the doors lock,
- the buzzer function is disabled, can be enabled only in non-
EU states,
- the LED extinguishes,
- protections are disabled.
11.5 - Disarming of system using the Cobra radio control
(versions 442x, 443x, 4485).
When button “B” of the Cobra radio control is
pressed:
- the doors lock,
- the buzzer function is disabled, can be
enabled only in non - EU states,
- the LED extinguishes,
- protections are disabled.
11.6 - Disarming of the passive engine cut-off function and
disarming of the anti-hi-jack function activation using the
Driver Card (where supplied).
The automatic recognition or the pressing of the Driver Card button
disarm the engine cut-off and anti-hi-jack functions.
GB
USER AND FITTING INSTRUCTIONS 4400
B
A