NGC-40 Hardware Manager - Pentair Thermal Management
NGC-40 Hardware Manager - Pentair Thermal Management NGC-40 Hardware Manager - Pentair Thermal Management
It may be easier to filter by module type using the filter box in the bottom left corner. Once you have selected all the modules you want to upload firmware to, press the Upload button. The upload will then begin. THERMAL MANAGEMENT SOLUTIONS EN-DigiTraceNGC40HWManager-IM-H58450 04/13 36/39
The status bar displays the progress of the upload. Once the upload is complete, the module appears in the list as before, with the updated firmware version number. Repeat the above steps for all of the module types you would like to update. THERMAL MANAGEMENT SOLUTIONS EN-DigiTraceNGC40HWManager-IM-H58450 04/13 37/39
- Page 1 and 2: USER MANUAL NGC-40 Hardware Manager
- Page 3 and 4: Section − 1 INTRODUCTION 1.1 Welc
- Page 5 and 6: When the file location and access o
- Page 7 and 8: During installation a program icon
- Page 9 and 10: The connection settings screen will
- Page 11 and 12: 3.2 Connecting via Ethernet If you
- Page 13 and 14: A window will appear. Enter the IP
- Page 15 and 16: 3.3 Configuration of the NGC-40-BRI
- Page 17 and 18: IMPORTANT: After making changes to
- Page 19 and 20: COM 1 and COM 2 are the RS-485 port
- Page 21 and 22: If you are done making changes, ret
- Page 23 and 24: Section − 4 WORKING WITH CONNECTE
- Page 25 and 26: THERMAL MANAGEMENT SOLUTIONS EN-Dig
- Page 27 and 28: Information about the version of NG
- Page 29 and 30: Status - shows the current status.
- Page 31 and 32: Step 2 Cycle Power on the NGC-40-B
- Page 33 and 34: Once the NGC-40-BRIDGE has been boo
- Page 35: After you have selected the file it
- Page 39: WWW.THERMAL.PENTAIR.COM NORTH AMERI
It may be easier to filter by module type using the filter box in the<br />
bottom left corner.<br />
Once you have selected all the modules you want to upload<br />
firmware to, press the Upload button. The upload will then begin.<br />
THERMAL MANAGEMENT SOLUTIONS EN-DigiTrace<strong>NGC</strong><strong>40</strong>HW<strong>Manager</strong>-IM-H58450 04/13 36/39
Change language