NGC-40 Hardware Manager - Pentair Thermal Management
NGC-40 Hardware Manager - Pentair Thermal Management NGC-40 Hardware Manager - Pentair Thermal Management
After a successful upload, the NGC-40-BRIDGE will briefly show a status of UPDATE_SUCCESS. Then it will appear as before, with the Firmware Version now showing the new version number. Step 4 After a successful firmware upgrade the NGC-40- BRIDGE will re-connect, Press the “Boot” button to resume normal operation To resume normal operation of the NGC-40-BRIDGE, select the Boot button beside it. THERMAL MANAGEMENT SOLUTIONS EN-DigiTraceNGC40HWManager-IM-H58450 04/13 32/39
Once the NGC-40-BRIDGE has been booted it disappears from the list, and when the list is clear you can return to the main menu by selecting the Main Menu button. THERMAL MANAGEMENT SOLUTIONS EN-DigiTraceNGC40HWManager-IM-H58450 04/13 33/39
- Page 1 and 2: USER MANUAL NGC-40 Hardware Manager
- Page 3 and 4: Section − 1 INTRODUCTION 1.1 Welc
- Page 5 and 6: When the file location and access o
- Page 7 and 8: During installation a program icon
- Page 9 and 10: The connection settings screen will
- Page 11 and 12: 3.2 Connecting via Ethernet If you
- Page 13 and 14: A window will appear. Enter the IP
- Page 15 and 16: 3.3 Configuration of the NGC-40-BRI
- Page 17 and 18: IMPORTANT: After making changes to
- Page 19 and 20: COM 1 and COM 2 are the RS-485 port
- Page 21 and 22: If you are done making changes, ret
- Page 23 and 24: Section − 4 WORKING WITH CONNECTE
- Page 25 and 26: THERMAL MANAGEMENT SOLUTIONS EN-Dig
- Page 27 and 28: Information about the version of NG
- Page 29 and 30: Status - shows the current status.
- Page 31: Step 2 Cycle Power on the NGC-40-B
- Page 35 and 36: After you have selected the file it
- Page 37 and 38: The status bar displays the progres
- Page 39: WWW.THERMAL.PENTAIR.COM NORTH AMERI
After a successful upload, the <strong>NGC</strong>-<strong>40</strong>-BRIDGE will briefly show a<br />
status of UPDATE_SUCCESS. Then it will appear as before, with<br />
the Firmware Version now showing the new version number.<br />
Step 4 After a successful firmware upgrade the <strong>NGC</strong>-<strong>40</strong>-<br />
BRIDGE will re-connect, Press the “Boot” button to resume<br />
normal operation<br />
To resume normal operation of the <strong>NGC</strong>-<strong>40</strong>-BRIDGE, select the<br />
Boot button beside it.<br />
THERMAL MANAGEMENT SOLUTIONS EN-DigiTrace<strong>NGC</strong><strong>40</strong>HW<strong>Manager</strong>-IM-H58450 04/13 32/39