NGC-40 Hardware Manager - Pentair Thermal Management

More documents

Recommendations

Info

Press the OK button to return to the Connection screen. If all configuration changes have been made, you can return to the main screen by pressing the Main Menu button. THERMAL MANAGEMENT SOLUTIONS EN-DigiTraceNGC40HWManager-IM-H58450 04/13 22/39
Section − 4 WORKING WITH CONNECTED DEVICES Once you are connected to the NGC-40-BRIDGE via Ethernet or RS-232, you can perform some basic functions and gather information about the modules on the CAN network. 4.1 Identifying Connected Devices The Test button shown next to each module will cause that module to execute an LED display test and all other modules’ LED’s to turn off. Each LED of the module under test will flash in sequence. This can be used to quickly identify the module in a panel, or for testing the LEDs. Modbus Address - the address of the particular module. Each module will have a unique address Device Type – Displays the NGC-40 module type (IO, HTC, HTC3) Module ID – the unique CAN ID number used to identify each module in hexadecimal format. THERMAL MANAGEMENT SOLUTIONS EN-DigiTraceNGC40HWManager-IM-H58450 04/13 23/39
Page 1 and 2: USER MANUAL NGC-40 Hardware Manager
Page 3 and 4: Section − 1 INTRODUCTION 1.1 Welc
Page 5 and 6: When the file location and access o
Page 7 and 8: During installation a program icon
Page 9 and 10: The connection settings screen will
Page 11 and 12: 3.2 Connecting via Ethernet If you
Page 13 and 14: A window will appear. Enter the IP
Page 15 and 16: 3.3 Configuration of the NGC-40-BRI
Page 17 and 18: IMPORTANT: After making changes to
Page 19 and 20: COM 1 and COM 2 are the RS-485 port
Page 21: If you are done making changes, ret
Page 25 and 26: THERMAL MANAGEMENT SOLUTIONS EN-Dig
Page 27 and 28: Information about the version of NG
Page 29 and 30: Status - shows the current status.
Page 31 and 32: Step 2 Cycle Power on the NGC-40-B
Page 33 and 34: Once the NGC-40-BRIDGE has been boo
Page 35 and 36: After you have selected the file it
Page 37 and 38: The status bar displays the progres
Page 39: WWW.THERMAL.PENTAIR.COM NORTH AMERI

NGC-40 Hardware Manager - Pentair Thermal Management

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?