BP200 Manual.pdf - Digitech

More documents

Recommendations

Info

Basic basic - Model based on an SWR Basic Black Dual Show dualsh - Model based on an Fender Dual Showman DigiFuzz dgfuzz - DigiTech Fuzz Guydrive guydrv - Model based from a Guyatone OD-2 Muff Fuzz muffuz - Model based from a Big Muff Pi Sparkle sparkl - Model based from a Voodoo Labs Sparkledrive DS Dist dsdist - Model based from a Boss DS-1 Distortion Marshall® is a registered trademark of Marshall Amplification Plc. Vox® is a registered trademark of Korg UK. Hiwatt, Fender,Ashdown, Sunn,Ampeg, SWR,Trace-Elliot, Mesa/Boogie, Guyatone, Electro Harmonix,Voodoo Labs, and Boss are trademarks of their respective companies and are in no way associated with DigiTech. Type - Rotate the AMP TYPE knob to select the type of Amp/Stompbox model. Gain - Rotate the GAIN knob to adjust the amount of gain for the selected model (1-99) Level - Rotate the MASTER LEVEL knob to control the preset level for the selected model (0-99). EQ Equalization is a useful tool used to shape the tonal response of the bass signal.The EQ is a 3-band EQ consisting of Bass, Mid and Treble. The frequency centers for each band may vary depending on the model selected in order to optimize their usability. Bass - Rotate the AMP TYPE knob to adjust the boost/cut of the Bass Frequency (+/- 12dB). Midrange - Rotate the GAIN knob to adjust the boost/cut of the Mid Frequency (+/- 12dB). Treble - Rotate the MASTER LEVEL knob to adjust the boost/cut of the Treble Frequency (+/-12dB). 19
20 Cabinet - Gate The Cabinet Modeling simulates different types of miked speaker cabinets. There are six cabinet types. The Silencer Noise Gate eliminates noise when you are not playing. The Auto Swell gate has 9 attack settings for automatically fading in the bass signal. The Cabinet choices are as follows: 1x15 – Based on an Ampeg Portaflex 1x15 cabinet 1x18 – Based on an Acoustic 360 1x18 cabinet 2x15 - Based on an Sunn 200S 2x15 cabinet 4x10 - Based on an Fender Bassman 4x10 cabinet 4x10 H - Based on an Eden 4x10 w/horn cabinet 8x10 - Based on an Ampeg SVT 8x10 cabinet Ampeg,Acoustic, Sunn, Fender, and Eden are trademarks of their respective companies and are in no way associated with DigiTech. Cabinet - Rotate the AMP TYPE knob to select one of 6 cabinet types . Gate Type - Rotate the GAIN knob to select the gate type (Off, Silncr, or Swel 1-9). Gate Thresh - Rotate the MASTER LEVEL knob to select the Noise Gate’s threshold, higher settings are higher thresholds (1-40).
Page 1 and 2: MODELING BASS PROCESSOR User’s Gu
Page 3 and 4: DECLARATION OF CONFORMITY Manufactu
Page 5 and 6: Table of Contents Introduction . .
Page 7 and 8: 2 Front Panel SLApin
Page 9 and 10: 4 Rear Panel 1. INPUT - Connect you
Page 11 and 12: 6 Stereo Operation Bass Amp Input/E
Page 13 and 14: 8 Modes and Functions Performance M
Page 15 and 16: 10 Store Mode After modifying a pre
Page 17 and 18: 12 Bypass Mode The BP200 can be byp
Page 19 and 20: 14 Rhythm Trainer The BP200 include
Page 21 and 22: 16 1. Power up unit while pressing
Page 23: 18 Compressor A Compressor is used
Page 27 and 28: 22 Phaser A phaser splits the incom
Page 29 and 30: 24 Detune A detuner makes a copy of
Page 31 and 32: 26 Appendix Specifications: Input:
Page 33 and 34: 28 Notes:
Page 35: DigiTech 8760 S. Sandy Parkway, San

BP200 Manual.pdf - Digitech

Create successful ePaper yourself

Delete template?

Save as template?