BP200 Manual.pdf - Digitech

More documents

Recommendations

Info

Effects and Parameters Signal Path The <strong>BP200</strong> is comprised of the following effect modules linked as follows: Cabinet Modeling Fretless/ Wah Compressor Whammy Bass Amp/ Stompbox Modeling Noise Gate Volume Effects Delay Reverb Pedal - Pre Fretless / Wah The fretless simulator creates a fretless bass sound with a fretted bass. The wah effect is controlled by an Expression pedal and makes the bass sound as if it’s saying “Wah”. Type - Rotate the AMP TYPE knob to select one of the following: OFF, Fretless1-3, Cry Wah, Boutique Wah, and Full Range Wah. Fret Amount - Rotate the GAIN knob to change the character of the fretless simulator. Fret Attack - Rotate the MASTER LEVEL knob to set the attack time of the fretless simulator. Note: Fret Amount and Fret Attack do not function when a Wah is selected. EQ Volume Pedal - Post 17
18 Compressor A Compressor is used to increase sustain, and prevent the signal from clipping the input of the other effects.The compressor threshold is a fixed setting. Amount - Rotate the AMP TYPE knob to increase the amount of compression (OFF, 1-99). Comp Gain - Rotate the GAIN KNOB to increase the compression level (1-6) Crossover - Rotate the MASTER LEVEL knob to adjust the compressor crossover frequency. Signals below this frequency are compressed (50Hz, 63Hz, 80Hz, 100Hz, 125Hz, 160Hz, 200Hz, 250Hz, 315Hz, 400Hz, 500Hz, 630Hz, 800Hz, 1.0KHz, 1.25KHz, 1.6KHz, 2.0KHz, 2.5KHz, 3.15KHz, & Full Range). Amp/Stompbox Models Selects the amp to be used for the preset. Choices are as follows: Rock Amp rock - Model based on an Ampeg SVT Ash Down ashdwn - Model based on an Ashdown ABM-C410H Bass Man basman - Model based on a Fender Bassman Solar 200 solar - Model based on a Sunn 200S Stellar stella - Model based on a SWR Interstellar Overdrive British britsh - Model based on a Trace-Elliot Commando Bomber bomber - Model based on an Ampeg B-15 Hi Wattage hiwatg - Modeled based on an Hiwatt 50 Bogey Man boogmn - Model based on an Mesa/Boogie Bass 400+
Page 1 and 2: MODELING BASS PROCESSOR User’s Gu
Page 3 and 4: DECLARATION OF CONFORMITY Manufactu
Page 5 and 6: Table of Contents Introduction . .
Page 7 and 8: 2 Front Panel SLApin
Page 9 and 10: 4 Rear Panel 1. INPUT - Connect you
Page 11 and 12: 6 Stereo Operation Bass Amp Input/E
Page 13 and 14: 8 Modes and Functions Performance M
Page 15 and 16: 10 Store Mode After modifying a pre
Page 17 and 18: 12 Bypass Mode The BP200 can be byp
Page 19 and 20: 14 Rhythm Trainer The BP200 include
Page 21: 16 1. Power up unit while pressing
Page 25 and 26: 20 Cabinet - Gate The Cabinet Model
Page 27 and 28: 22 Phaser A phaser splits the incom
Page 29 and 30: 24 Detune A detuner makes a copy of
Page 31 and 32: 26 Appendix Specifications: Input:
Page 33 and 34: 28 Notes:
Page 35: DigiTech 8760 S. Sandy Parkway, San

BP200 Manual.pdf - Digitech

Create successful ePaper yourself

Delete template?

Save as template?