Manual CC-6000 - Convision
Manual CC-6000 - Convision
Manual CC-6000 - Convision
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Check if it Works<br />
Once the power is supplied to the camera, it will start booting. The system will boot up to an operating<br />
mode after approximately 40-60 seconds. The green LED on the Ethernet port will flash indicating the<br />
system is ready.<br />
Software provided on the disc called Cyexplorer allows you to check the IP address and other network<br />
details of the camera. Please refer to the Cyexplorer manual for instructions on how to find the IP<br />
address of the camera and if required changing it.<br />
‣ Encoder LED Display<br />
PWR STATUS LINK<br />
DATA<br />
Red<br />
Green<br />
Blinking<br />
OFF<br />
OFF<br />
Above LED status display shows that neither camera is connected nor a decoder is connected. Once<br />
the encoder is connected to a decoder, color of link LED will light in green color and the LED will blink<br />
as video or audio transmissions occur.<br />
‣ Decoder LED Display<br />
PWR STATUS LINK<br />
DATA<br />
Red<br />
Green<br />
Blinking<br />
OFF<br />
Above LED status display shows that the encoder has started without connecting to an encoder. Once<br />
an encoder is connected, the color of link LED will be changed to green and the LED will blink as video<br />
or audio data transmissions occur.<br />
<strong>Manual</strong> <strong>CC</strong> <strong>6000</strong> 14