Thompson Center Contender Barrels & Accessories - Amazon S3

New! For 2008! Lee Breech Lock Challenger Press - Change dies
instantly with a twist of the wrist, and you never have to re-adjust your
die. Introducing The Breech Lock Quick Change Die System. A larger
than average “O” frame opening allows for maximum hand clearance.
The spent Primer catcher is positive and allows you to route the spent
primers directly to the trash can. Priming is a dream with the Lee Lever
Prime System. Best of all, it includes the Breech Lock Quick Change
die system. Press includes (3) Breech Lock quick change die inserts.
Order No. 006-90588 $39.99
Spare Breech Lock Inserts 2pk
4 Die Breech Lock Box
Order No.
006-90600
006-90422
Price
$7.04
2.77
Lee 50th Anniversary Breech Lock Challenger Kit - Includes the new Breech Lock
Challenger Press and three Breech Lock quick-change bushings. Kit also includes Perfect
Powder Measure, The Lee Safety Scale, Powder Funnel. Case Preparation Tools include a
cutter and lock stud to trim cases, Lee chamfer tool, a tube of premium sizing lube, a small
and large primer pocket-cleaning tool. But that’s not all! You also get the Auto-Prime and a
set of Auto-Prime shell holders. Order No. 006-90030 $89.99
Lee Turret Press - A strong and
powerful tool. Compound linkage
full length sizes the largest magnum
cases with ease.
For left or right hand use! Built in primer catcher. Snap out
turret. Primer arm lifts out to reverse for large or small size.
Why fool around with screwing dies in and out when the
convenience of a Lee Turret Press actually costs less
Extra turrets are available in this section. This is a press
only. Order Dies separately!!
Turret Press
Turret Press w/ Auto Index
Updating Kit(includes
free 4 hole Turret)
Order No.
006-90496
006-90576
006-90933
Price
$63.45
58.68
14.10
4 hole Turret Press w/ Auto Index - Lee now makes the Turret
Press with a 4 station turret! This allows you to install your
Factory Crimp Die and Taper Crimp Die in the press. Updating
kit will convert your 3 station to a 4 in a matter of minutes!
4 hole Turret Press with Auto-Index
Updating Kit(includes free 4 hole Turret)
Extra 4 hole Turret
Classic Turret Press - The Classic Turret features the solid
steel linkage of the Lee Classic Cast. Your first stroke of the
hardwood gripped lever will convince you this is one, solid
smooth press! The sturdy iron base shows its Classic Cast
roots. The long stroke allows rifle cases over three inches
long to be loaded using the automatic index. Deactivate the
Auto-Index and cases as long as the monster 50BMG can be
loaded. The rigid cast iron frame supports the ram with over
12 square inches of area. The industry’s largest ram is drilled
completely through to dispose primers in an attached clear
PVC tube. Order No. 006-90064 $90.97
Order No.
006-90932
006-90933
006-90269
Price
$64.84
14.10
9.15
Lee Safety Prime- Never touch the primers from box to shell.
Primer flip tray features a CAD designed flipping surface that
instantly rights the primers. Change primer size in seconds.
Primers are dispensed with a satisfying click of the primer feed
trigger.
Order No. Price
Small Primer Feeder 006-90995 $14.10
Large Primer Feeder 006-90996 14.10
Large & Small 006-90997 21.16
Update Kit
Update Kit for pre·2006 presses -
Everything required to add primer
feed. Includes both large and small
Safety Primer Feed
Order No. 006-90042 $28.21
Deluxe Turret Reloading Kit w/Auto
Index (4 Hole Turret) - The rugged turret
press, along with the Auto Disk Powder
Measure, produce high quality pistol ammunition
with the utmost in convenience. A finished
round with three strokes of the lever.
When it is time to change calibers, simply
snap in a new turret and begin loading within
seconds. In addition the Deluxe Turret
Reloading Kit comes complete with: the Lee
Safety Scale, a primer pocket cleaner, cutter
and lockstud, and a chamfer tool. All you
need to start loading is a set of dies.
Order No. 006-90928 $99.63
Classic Cast Press
Small Primer Feeder
Large Primer Feeder
Lee’s Classic Cast Single Stage Press - Rigid cast
iron frame, cast and machined in the USA. Baked powder
finish and all steel linkage make this one of the
most attractive and sturdy presses made. Features
Large Opening, Classic “O” design for max strength,
large flat base with 3 holes for mounting, Adj Handle,
Auto Primer with large and small primer arms, Large
Hollow Ram catches every primer. Threaded Die
Adapter accepts 7/8-14” dies, remove and press
accepts 1 1/4-12” Large series dies!
Order No.
006-90998
006-90995
006-90996
Order No.
223 Remington
006-90232
22/250
006-90233
243 Winchester
006-90235
270 Winchester
006-90240
7mm Remington Magnum 006-90242
30/30 Win (30 Rem) 006-90244
308 Winchester
006-90245
30/06 Springfield
006-90248
45/70 Government 006-90264
9mm Luger
006-90254
38 Special
006-90257
357 Magnum
006-90258
*44 Magnum
006-90260
*45 ACP
006-90262
*45 Colt
006-90263
**These calibers require considerable force for sizing
Price
$81.90
14.10
14.10
Reloader Press - An outstanding value. Exclusive balanced
lever that can't drop down to pinch your fingers. Unlimited
hand clearance that only "C" frame can offer. Works equally
well with the right or left hand. Even if you already own a
press, an extra press is always useful for decapping, bullet
seating or bullet sizing. Order No. 006-90045 $24.67
Reloader Press & Manual - Get started with a Reloader Press. A full
size reloading press that accepts all standard dies, plus a copy of
"Lee’s Modern Reloading Manual 2nd edition"
Order No. 006-90700 $29.06
Hand Press- This press is more powerful than
some bench mounted tools. Even large magnum
cases such as 375 H&H can be full length sized
and loaded. Uses standard 7/8”x14 dies.
Order No. 006-90685 $23.87
The Classic Lee Loader - The perfect tool for those who wish to simply try reloading
because it will pay for itself in just an hour or two. Everything you need to begin loading
one caliber. *These Calibers require considerable force for sizing $20.46 per set
80