Gasmizer Manual - Submarine Manufacturing and Products Ltd
Gasmizer Manual - Submarine Manufacturing and Products Ltd
Gasmizer Manual - Submarine Manufacturing and Products Ltd
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
March 2009<br />
at an early stage such that intervention is possible in the event of a scrubber breakthrough or<br />
loss of make up oxygen supply.<br />
1.7.4 From the volume tank the gas is supplied to the conventional bell supply manifold in<br />
the dive control.<br />
1.7.5 In case of malfunction or failure of any pressure gauge, valve or regulator in the<br />
<strong>Gasmizer</strong> System, the diver should be taken off the <strong>Gasmizer</strong> System <strong>and</strong> put on one of the<br />
back-up supply systems described above while repairs are undertaken.<br />
1.7.6 Reclaim diving should not take place with pressure gauges isolated or regulators<br />
manually bypassed.<br />
1.8 Control Console<br />
1.8.1 The control console allows the entire Electric <strong>Gasmizer</strong> system to be monitored <strong>and</strong><br />
operated from dive control. It can be split into four separate sections.<br />
1. THE BOOSTER PANEL gives a remote start/stop capability for the gas booster as<br />
well as indicator lights to show the Booster Status.<br />
2. THE OXYGEN PANEL allows control of the make up of metabolic oxygen i.e.<br />
replaces the oxygen which the diver uses.<br />
3. THE CONTROL PANEL allows control of the back pressure in the exhaust<br />
umbilical.<br />
4. THE MAKE UP PANEL allows control of the pressure at which the make up gas<br />
supply begins flowing to replenish any loss of gas in the system. It also contains a<br />
means of rapid oxygen injection for changing the gas mix.<br />
NOTE<br />
Rapid Oxygen Injection must not be carried out whilst divers are using the system.<br />
Chap 1 Page 9 of 168 OM002 Rev 5