WARWICK - AMPLIFICATION CL ND 4 - Solid-state combo 150 watts RMS (max. 200 watts), 4 ohms, 100dB, 1 x 12" Celestion neodymium speaker (200W, 4 ohms, 98dB, resonant frequency: 63Hz, frequency range: 65Hz-4000Hz), HF-horn with attenuator (power rating 30W, max. 40W, 8 ohms, 95dB, resonant frequency: 2,5kHz, frequency range: 1,2kHz- 20kHz), Controls for Gain, Bass, Mid Freq., Mid Level, Treble and Master, Clip LED, Switches for Limiter, Low Boost and High Boost, Mute switch, Effekt Send and Return, Line Out, Phones out, Tuner out, XLR DI out, Switches for ground lift, Sub Sonic, DI Pre/Post, Fan cooling (non permanent), Protection circuits for short circuit, HF oscillation, overheating, DC, Bass reflex housing, Retractable handle and recessed rollers, Weight: 21 kg, Dimensions (W/H/D): 0,45 x 0,48 x 0,40 m CCL ND 4 / / CCL 210 ND 8 - Solid-state combo • 250 watts RMS (max. 300 watts), 4 ohms, 101dB • 1 x 15” Celestion Neodymium speaker (300W, 4 ohms, 100dB, resonant frequency: 50Hz, frequency range: 45Hz-3000Hz) • HF-horn with attenuator (power rating 30W, max. 40W, 8 ohms, 95dB, resonant frequency: 2,5kHz, frequency range: 1,2kHz-20kHz) • Controls for Gain, Bass, Punch, Mid Freq., Mid Level, Attack, Treble and Master • Clip LED • Switches for Limiter, Low Boost and High Boost, Mute switch • Effekt Send and Return • Line Out, Phones out, Tuner out, XLR DI out • Switches for ground lift, Sub Sonic, DI Pre/Post • Fan cooling (non permanent) • Protection circuits for short circuit, HF oscillation, overheating, DC • Bass reflex housing, retractable handle and recessed rollers • Weight: 29 kg, dimensions (W/H/D): 0,54 x 0,63 x 0,49 m CCL ND 8 same like CCL ND 4, but with 8 ohms Neodymium speaker and second speaker out. Weight: 28 kg, dimensions (W/H/D): 0,54 x 0,63 x 0,49 m CCL 210 ND 8 same like CCL ND 4, but with 2x10” Neodymium speakers (8 ohms) and additional Speaker Out to connect an external box. Weight: 28 kg, dimensions (W/H/D): 0,54 x 0,63 x 0,49 m
Sleeve •19"/2U • 17 mm plywood • side handle • felt covered with rubber feet • metal corners • 2 heat vents on top • suitable for ProFet 3.2 and ProFet 5.1 WARWICK - AMPLIFICATION Pro Fet 3.2 / 5.1 Bass head, 300 W (Pro Fet 3.2) or 500 W (Pro Fet 5.2), 4 ohms 19" / 2U Gain with Clip LED Adjustable Compressor Variable Contour Switches for Deep and Bright Controls for Bass, Low Mid, High Mid and Treble FX loop DI out with Pre/Post and ground lift switches, Line out, Tuner out Weights: 10 kg (Pro Fet 3.2), 12 kg (Pro Fet 5.2) Dimensions (W/H/D): 19“ x 2HE x 30 cm (34 cm incl. handles) Also available with sleeve.