Instruction Manual - Team Associated

More documents

Recommendations

Info

8 :: Front Shock Tower/Bumper Build (cont.) - Bag A 7253 x2 2.62” steel turnbuckle Front Camber Turnbuckle 7230 x4 Ballcup Build left and right sides! 48.5mm 7101 x2 2.80” steel turnbuckle Steering Camber Turnbuckle 7230 x4 Ballcup 53mm Orient the notch to the left throughout the car. It indicates which end has the left hand threads! :: Front Shock Tower/Bumper Build (cont.) - Bag A 7107 SC10GT chassis 6922 x3 4-40 x 1/2 fhcs
:: Ball Differential Build - Bag B 6581 x12 3/32” carbide diff balls 7666 Diff ring 7666 Diff ring 9 #6591 Diff lube #6591 Diff lube #6591 Diff lube 7664 Diff gear 52T 7667 Diff outdrive hub, right 7668 Diff outdrive hub, left :: Ball Differential Build (cont.) - Bag B 6574 5/64 diff thrust ball x6 #6588 black grease 6573 Thrust washer x2 6589 x2 5/32 x 5/16 bearing 6575 Diff thrust bolt :: Ball Differential Build (cont.) - Bag B 6575 Locking T-nut ! 6582 Diff thrust spring ! Pre-compress spring 6575 Diff bolt cover As you tighten the diff bolt, you will notice the T-nut ears moving closer to the bottom of the outdrive slot. This compresses the spring behind the T-nut. The spring should be completely compressed at the same time the T-nut reaches the end of the slot. CAUTION! Pay close attention to the feeling when the spring is completely compressed. Do not over tighten the bolt. When you feel the spring completely compressed, loosen the diff bolt 1/8” of a turn. You diff should now operate smoothly with resistance as the outdrives move in opposite directions. After you have driven the car once, re-check the diff setting.
Page 1 and 2: 4/12
Page 3 and 4: 3 :: Table of Contents 1...........
Page 5 and 6: 5 :: Steering Build (cont.) - Bag A
Page 7: 7 :: Front Shock Tower/Bumper Build
Page 11 and 12: 11 :: Gearbox Build (cont.) - Bag B
Page 13 and 14: 13 :: Rear Shock Tower Build (cont.
Page 15 and 16: 15 :: Rear Suspension Build (cont.)
Page 17 and 18: 17 :: Radio Tray Build (cont.) - Ba
Page 19 and 20: 19 :: Radio Tray Build (cont.) - Ba
Page 21 and 22: 21 :: Engine Build - Bag F Nitro En
Page 23 and 24: 23 :: Engine Build (cont.) - Bag F
Page 25 and 26: 25 :: Shocks Build - Bag G Front Sh
Page 27 and 28: 27 :: Shocks Build (cont.) - Bag G
Page 29 and 30: 29 :: Tuning Tips Tips for Beginner
Page 31 and 32: 31 :: Shocks 5407 6299 6441 6458 64
Page 33 and 34: 33 :: Front Bulkhead 4334 6915 6922
Page 35 and 36: 35 :: Slipper 6629 7485 7486 7953 7
Page 37 and 38: 37 :: Engine / Clutch / Air Filter
Page 39 and 40: 39 :: Factory Team and Option Parts
Page 41 and 42: 41 :: 1/18 Kits and RTR’s 20103 2
Page 43 and 44: Front Suspension 2 3 1 Driver: SC10
Page 45 and 46: Front Suspension Setup Sheet Driver

Instruction Manual - Team Associated

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?