Download manual - Systema Polska Sp. z o.o.
Download manual - Systema Polska Sp. z o.o. Download manual - Systema Polska Sp. z o.o.
SYSTEMA S.p.A. Airtight gas convectors 3.16 Difetti di funzionamento e rimedi degli apparecchi elettronici (Mod. K21E, K28E, K40E, K55E, K28VE, K40VE, K55VE, K21FE, K28FE, K40FE, K55FE) ................................................................................................................. 39 4 ISTRUZIONI PER L’UTENTE ........................................................... 40 4.1 Norme generali .................................................................................................... 40 4.2 Garanzia............................................................................................................... 40 4.2.1 Oggetto della garanzia .....................................................................................................40 4.2.2 Esclusione della garanzia ................................................................................................ 41 4.2.3 Competenze .................................................................................................................... 41 4.2.4 Operatività ed efficacia della garanzia.............................................................................. 41 5 ACCANTONAMENTO ...................................................................... 42 6 ROTTAMAZIONE.............................................................................. 42 7 CERTIFICATI CE .............................................................................. 43 8 NOTE................................................................................................. 45 Rev. 05IT0112-1 4
Airtight gas convectors 1 GENERAL RULES SYSTEMA S.p.A. This Manual is an integral and essential part of this device and must be carefully stored in its vicinity for purposes of rapid consultation. Read the instructions and warnings provided herein carefully because they provide important information regarding safety, installation, use and maintenance. Installation must be performed exclusively by qualified professional personnel in complete respect of the safety regulations in force. The Manufacturer declines all liability for damages caused by the erroneous installation or incorrect and/or inappropriate use of the device. Keep all potentially dangerous packaging elements (nylon, polystyrene foam, wood, staples, etc.) far from the reach of children. The device must be started for the first time by qualified personnel only. Immediately switch off the device whenever it stops and/or malfunctions. All repairs must be performed by qualified personnel using original spare parts only. Failure to observe the above can compromise operational safety. Scrupulously respect the indications provided by the Manufacture to guarantee satisfactory operation. Never leave clothes, paper or other objects that might obstruct the passage of hot air from the slots on top of the radiator. Delicate surfaces such as curtains, furniture, and wooden or plastic chairs must be kept at a minimum distance of 30 cm from the device. Provide extra protection against the risk of burning by contact of children, the elderly or disabled with the hot surfaces of the shell wherever necessary. Such additional protection must not obstruct the passage of hot air and the irradiation of heat from the front panel. 2 GENERAL TECHNICAL CHARACTERISTICS 2.1 Device classification Device type: Type C11 (natural draught) and C13 (forced draught) depending on the flue gas suction and expulsion system used. Device output class: 1 2.2 Packing list and check on incoming material a) The device is delivered complete with all its parts in a box that also contains a gas transformation kit and a set of wall attachment screws. b) The air/flue gas terminals and the grille are packed separately. 5 Rev. 05IT0112-1
- Page 1 and 2: AIRTIGHT GAS CONVECTORS Pilot flame
- Page 3: Airtight gas convectors Summary SYS
- Page 7 and 8: Airtight gas convectors CONTROL UNI
- Page 9 and 10: Airtight gas convectors 2.6 Electro
- Page 11 and 12: Airtight gas convectors 2.8 Explode
- Page 13 and 14: Airtight gas convectors SYSTEMA S.p
- Page 15 and 16: Airtight gas convectors SYSTEMA S.p
- Page 17 and 18: Airtight gas convectors Series E wi
- Page 19 and 20: Airtight gas convectors Series FE w
- Page 21 and 22: Airtight gas convectors SYSTEMA S.p
- Page 23 and 24: Airtight gas convectors SYSTEMA S.p
- Page 25 and 26: Airtight gas convectors 3.4 Specifi
- Page 27 and 28: Airtight gas convectors 3.5 Gas lin
- Page 29 and 30: Airtight gas convectors SYSTEMA S.p
- Page 31 and 32: Airtight gas convectors SYSTEMA S.p
- Page 33 and 34: Airtight gas convectors SYSTEMA S.p
- Page 35 and 36: Airtight gas convectors SYSTEMA S.p
- Page 37 and 38: Airtight gas convectors 4 INSTRUCTI
- Page 39 and 40: Airtight gas convectors 5 PUTTING T
- Page 41 and 42: Airtight gas convectors SYSTEMA S.p
- Page 43: Airtight gas convectors SYSTEMA S.p
Airtight gas convectors<br />
1 GENERAL RULES<br />
SYSTEMA S.p.A.<br />
This Manual is an integral and essential part of this device and must be carefully stored in its<br />
vicinity for purposes of rapid consultation.<br />
Read the instructions and warnings provided herein carefully because they provide important<br />
information regarding safety, installation, use and maintenance.<br />
Installation must be performed exclusively by qualified professional personnel in complete<br />
respect of the safety regulations in force. The Manufacturer declines all liability for damages<br />
caused by the erroneous installation or incorrect and/or inappropriate use of the device.<br />
Keep all potentially dangerous packaging elements (nylon, polystyrene foam, wood, staples,<br />
etc.) far from the reach of children.<br />
The device must be started for the first time by qualified personnel only.<br />
Immediately switch off the device whenever it stops and/or malfunctions. All repairs must be<br />
performed by qualified personnel using original spare parts only. Failure to observe the above<br />
can compromise operational safety.<br />
Scrupulously respect the indications provided by the Manufacture to guarantee satisfactory<br />
operation.<br />
Never leave clothes, paper or other objects that might obstruct the passage of hot air from<br />
the slots on top of the radiator.<br />
Delicate surfaces such as curtains, furniture, and wooden or plastic chairs must be kept at a<br />
minimum distance of 30 cm from the device.<br />
Provide extra protection against the risk of burning by contact of children, the elderly or disabled<br />
with the hot surfaces of the shell wherever necessary. Such additional protection must not<br />
obstruct the passage of hot air and the irradiation of heat from the front panel.<br />
2 GENERAL TECHNICAL CHARACTERISTICS<br />
2.1 Device classification<br />
Device type: Type C11 (natural draught) and C13 (forced draught) depending on the flue gas<br />
suction and expulsion system used.<br />
Device output class: 1<br />
2.2 Packing list and check on incoming material<br />
a) The device is delivered complete with all its parts in a box that also contains a gas<br />
transformation kit and a set of wall attachment screws.<br />
b) The air/flue gas terminals and the grille are packed separately.<br />
5<br />
Rev. 05IT0112-1
Change language