Download manual - Systema Polska Sp. z o.o.

More documents

Recommendations

Info

SYSTEMA S.p.A. Airtight gas convectors 4.2.2 Exclusions from the guarantee 1) The Guarantee is not operative in the following cases: a) Faults that cannot be attributed to defects in the material or manufacture, without limitation: - breakages that occurred during transport; - non conformity of the plant with the laws and the local regulations in force; - failure to respect the installation specifications given in the technical notes accompanying the appliance and/or of good technical practice; - damage caused by accidents, fire, general accidents or negligence that cannot be attributed to SYSTEMA. b) Tampering or faults due to interventions of non authorised personnel. c) Defects caused by malfunctions depending on the electric power supply mains or on fuel. d) Faults due to: bad maintenance, neglect or improper use, variations in voltage in the power supply, humidity and dust in the premises, errors in dimensions and/or faulty performance of installation. e) Corrosion or breakages caused by: stray current, condensation, overheating caused by incorrect regulation of the gas pressure in the supply or in the burner, or the use of gas fuel with different heating characteristics from those on the data plate. f) Use of non original spare parts or parts not authorised by SYSTEMA. g) Normal wear and tear. h) Products that have been incorrectly kept or stored. 2) The Guarantee is not operative in the following cases: a) Payment of the appliance has not been carried out within the terms contemplated in the contract. b) If “Commissioning” has not been performed by the S.C. and/or a copy of the respective Guarantee Certificate, duly compiled in all parts and signed, has not been received. c) The user has not reported with fault within 10 days of discovering it. 4.2.3 Competence 1) Operations under Guarantee must be requested, on pain of expiry, to the S.C. that carried out “Commissioning”. In this case the user must show the S.C. the Guarantee Certificate. 2) The S.C. will take action during normal working hours, depending on its own organisation necessities. 4.2.4 Operativity and effectiveness of the guarantee 1) In order to make the Guarantee operative and effective, the user must: a) Ask the installer for the name of the S.C. for “Commissioning”. b) Show the Guarantee Certificate to the personnel in charge, completing it in all parts and asking the S.C. to apply the stamp and sign it in the spaces provided. c) Send a copy of the Warranty Certificate to the manifacturer; the other copy of the Warranty Certificate has to be delivered to the Assistance Service Centre which signs the Certificate. The last copy remain to the user who will show it to the Assistance Service in case of assistance in warranty. Rev. 05IT0112-1 38
Airtight gas convectors 5 PUTTING THE DEVICE OUT OF USE SYSTEMA S.p.A. Whenever the device will not be used for a long period of time, we recommend performing the following operations: Set the main power switch in the “O” position and disconnect the device from the electrical power mains. Close the gas supply line valve and disconnect the device from the gas supply mains. ATTENZIONE! Far eseguire tutte le operazioni di scollegamento da personale tecnico autorizzato! 6 SCRAPPING Whenever this device will no longer be used, we recommend making it inoperative by disconnecting it from the electrical power and gas mains removing the control panel. We also recommend making harmless all parts that may constitute sources of risk. Remove the entire electrical system by observing the laws in force regulating the elimination of such materials. Scrap the rest of the device as scrap metal and take it to an authorized collection center for such materials. ATTENZIONE! Far eseguire tutte le operazioni di scollegamento da personale tecnico autorizzato! 39 Rev. 05IT0112-1
Page 1 and 2: AIRTIGHT GAS CONVECTORS Pilot flame
Page 3 and 4: Airtight gas convectors Summary SYS
Page 5 and 6: Airtight gas convectors 1 GENERAL R
Page 7 and 8: Airtight gas convectors CONTROL UNI
Page 9 and 10: Airtight gas convectors 2.6 Electro
Page 11 and 12: Airtight gas convectors 2.8 Explode
Page 13 and 14: Airtight gas convectors SYSTEMA S.p
Page 17 and 18: Airtight gas convectors Series E wi
Page 19 and 20: Airtight gas convectors Series FE w
Page 25 and 26: Airtight gas convectors 3.4 Specifi
Page 27 and 28: Airtight gas convectors 3.5 Gas lin
Page 37: Airtight gas convectors 4 INSTRUCTI
Page 43: Airtight gas convectors SYSTEMA S.p

Download manual - Systema Polska Sp. z o.o.

Create successful ePaper yourself

Delete template?

Save as template?