User Manual - Etilize
User Manual - Etilize
User Manual - Etilize
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1. Read the safety information that begins on page vii and “Installation guidelines”<br />
on page 29.<br />
2. Turn off the server and peripheral devices and disconnect all external cables<br />
and power cords; then, remove the side cover. See “Removing the side cover”<br />
on page 32.<br />
3. Follow the cabling instructions, if any, that come with the adapter. Route the<br />
adapter cables before you install the adapter.<br />
4. Follow the instructions that come with the adapter to set jumpers or switches, if<br />
any.<br />
5. Rotate the rear adapter-retention bracket to the open position and remove it<br />
from the server.<br />
6. Remove the screw that secures the expansion-slot cover to the chassis. Store<br />
the expansion-slot cover and screw in a safe place for future use.<br />
Note: Expansion-slot covers must be installed on all vacant slots. This<br />
maintains the electronic emissions standards of the server and ensures proper<br />
ventilation of server components.<br />
Rear adapter<br />
retention<br />
bracket<br />
Expansion-slot<br />
screw<br />
(Optional)<br />
Adapter<br />
Left side<br />
Front adapter<br />
retention bracket<br />
Right side<br />
7. Touch the static-protective package that contains the adapter to any unpainted<br />
metal surface on the server. Then, remove the adapter from the<br />
static-protective package. Avoid touching the components and gold-edge<br />
connectors on the adapter.<br />
Chapter 2. Installing optional devices 51