User Manual - Etilize

v The following table lists the maximum DIMM population using ranked UDIMM.
Table 5. Maximum memory population using ranked UDIMMs (depending on your model)
Number of UDIMMs DIMM type DIMM size Total memory
4 single-rank UDIMMs 1 GB 4 GB
4 single-rank UDIMMs 2 GB 8 GB
4 dual-rank UDIMMs 2 GB 8 GB
4 dual-rank UDIMMs 4 GB (when
available)
16 GB
v The following table lists the UDIMM memory population rule to optimize the
system performance.
Table 6. UDIMMs population rule for dual-channel symmetric mode
DIMMs
connector 1
DIMMs
connector 2
DIMMs
connector 3
DIMMs
connector 4
DIMMs
connector 5
DIMMs
connector 6
populated empty empty empty empty empty
populated empty empty populated empty empty
populated populated empty populated populated empty
Registered DIMMs (RDIMMs)
The following notes provide information that you must consider when you install
RDIMMs:
v The memory channels run at the fastest common frequency of the installed
DIMMs.
v Do not use both RDIMMs and UDIMMs in the same server.
v The server supports up to three single-rank, dual-rank, or quad-rank RDIMMs per
channel.
v The RDIMM options that are available for the server are 1 GB, 2 GB, 4 GB, and
8 GB (when available) memory DIMMs.
v You can install a maximum of 32 GB of memory in the server when you use
RDIMMs.
v The following table lists the supported RDIMM population.
Table 7. Supported RDIMM population per channel
DIMMs slots
per channel
DIMMs installed
in each channel DIMM type DIMM speed
3 1 Registered
DDR3 ECC
3 2 Registered
DDR3 ECC
3 3 Registered
DDR3 ECC
3 1 Registered
DDR3 ECC
3 2 Registered
DDR3 ECC
Ranks per
DIMM (any
combination)
1066, 1333 single-rank,
dual-rank
1066, 1333 single-rank,
dual-rank
800 single-rank,
dual-rank
1066 quad-rank
800 quad-rank
Chapter 2. Installing optional devices 37