User Manual - Etilize

More documents

Recommendations

Info

Electronic emission notices 3039 E. Cornwallis Road P.O. Box 12195 Research Triangle Park, North Carolina 27709-2195 U.S.A. In the request, be sure to include the publication part number and title. When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any way it believes appropriate without incurring any obligation to you. Federal Communications Commission (FCC) statement Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. IBM is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Class A emission compliance statement This Class A digital apparatus complies with Canadian ICES-003. Avis de conformité à la réglementation d'Industrie Canada Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Australia and New Zealand Class A statement Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. United Kingdom telecommunications safety requirement Notice to Customers This apparatus is approved under approval number NS/G/1234/J/100003 for indirect connection to public telecommunication systems in the United Kingdom. 90 System x3200 M3 Types 7327 and 7328: Installation and <strong>User</strong>’s Guide
European Union EMC Directive conformance statement This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection requirements resulting from a nonrecommended modification of the product, including the fitting of non-IBM option cards. This product has been tested and found to comply with the limits for Class A Information Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment were derived for commercial and industrial environments to provide reasonable protection against interference with licensed communication equipment. Attention: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. European Community contact: IBM Technical Regulations Pascalstr. 100, Stuttgart, Germany 70569 Telephone: 0049 (0)711 785 1176 Fax: 0049 (0)711 785 1283 E-mail: tjahn@de.ibm.com Taiwanese Class A warning statement Germany Electromagnetic Compatibility Directive Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU-Richtlinie zur Elektromagnetischen Verträglichkeit Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG zur Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten und hält die Grenzwerte der EN 55022 Klasse A ein. Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne Zustimmung der Appendix B. Notices 91
Page 1:
System x3200 M3 Types 7327 and 7328
Page 4 and 5:
Note: Before using this information
Page 6 and 7:
Connecting external devices . . . .
Page 8 and 9:
vi System x3200 M3 Types 7327 and 7
Page 10 and 11:
Important: All caution and danger s
Page 12 and 13:
Statement 2: CAUTION: When replacin
Page 14 and 15:
Statement 4: ≥ 18 kg (39.7 lb)
Page 16 and 17:
Statement 13: DANGER Overloading a
Page 18 and 19:
xvi System x3200 M3 Types 7327 and
Page 20 and 21:
The following illustration shows th
Page 22 and 23:
Note: The illustrations in this doc
Page 24 and 25:
v If Autostart is enabled, insert t
Page 26 and 27:
Table 1. Features and specification
Page 28 and 29:
What your server offers The server
Page 30 and 31:
Computing Group (TCG) specification
Page 32 and 33:
IBM Systems Director v Memory chang
Page 34 and 35:
The following is an illustration of
Page 36 and 37:
Hard disk drive activity LED Power-
Page 38 and 39:
Rear view The following illustratio
Page 40 and 41:
v If a power failure occurs while t
Page 42 and 43:
System-board internal connectors Th
Page 44 and 45:
System-board switches and jumpers T
Page 46 and 47:
System-board external connectors Th
Page 48 and 49:
v Before you install optional hardw
Page 50 and 51:
Removing the side cover Important:
Page 52 and 53:
6. Carefully pull the two bezel cli
Page 54 and 55:
U = Unbuffered DIMM with no ECC (x6
Page 56 and 57:
v The following table lists the max
Page 58 and 59: Installing drives Depending on the
Page 60 and 61: DANGER Some laser products contain
Page 62 and 63: Drive retainer clip 10. Slide the d
Page 64 and 65: Server model with four hot-swap dri
Page 66 and 67: To install a simple-swap hard disk
Page 68 and 69: Installing an adapter The following
Page 70 and 71: 8. If you are installing a full-len
Page 72 and 73: Important: To ensure that any of yo
Page 74 and 75: Note: Before you continue, check al
Page 76 and 77: Installing the virtual media key To
Page 78 and 79: 4. If you are instructed to return
Page 80 and 81: Completing the installation If you
Page 82 and 83: Reinstalling the side cover If you
Page 84 and 85: Connecting external devices Install
Page 86 and 87: Using the Setup utility The followi
Page 88 and 89: Select this choice to view or set t
Page 90 and 91: Passwords From the User Security me
Page 92 and 93: Starting the backup server firmware
Page 94 and 95: 2. The ServerGuide program stores i
Page 96 and 97: Note: Approximately 1 to 3 minutes
Page 98 and 99: 3. On the Welcome page, type a time
Page 100 and 101: In addition, you can download an LS
Page 102 and 103: Updating IBM Systems Director If yo
Page 104 and 105: Software service and support You ca
Page 106 and 107: Important notes Adobe and PostScrip
Page 110 and 111: IBM verändert bzw. wenn Erweiterun
Page 112 and 113: drive bay filler panel 41, 43 bay i
Page 114 and 115: password administrator 72 forgotten
Page 116: 98 System x3200 M3 Types 7327 and 7
show all

User Manual - Etilize

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?