DG8SAQ VNWA 3 & 3E - Vector Network Analyzer - SDR-Kits
DG8SAQ VNWA 3 & 3E - Vector Network Analyzer - SDR-Kits
DG8SAQ VNWA 3 & 3E - Vector Network Analyzer - SDR-Kits
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.2.6 This step in only applicable to <strong>VNWA</strong> <strong>3E</strong> with Expansion board:<br />
Select Tab "Audio Settings" and tick the box "Auxiliary Audio Capture Device Available" 2.<br />
This will bring up the configuration of the Auxiliary Audio Capture Device<br />
Check and adjust settings 1. to 4, are correctly set as shown below:<br />
Note: Audio Capture Devices may either be shown as “Line” or “Microphone” depending on<br />
type of USB-Codec chip fitted. (see also 3.2.14 USB-Codec Configuration)<br />
Troubleshooting: If "Auxiliary Audio Capture Device available" is NOT shown, then exit<br />
<strong>VNWA</strong> application and add the line AuxAudio=1 to the file <strong>VNWA</strong>.ini with a text editor and<br />
restart the <strong>VNWA</strong> Application. See also <strong>VNWA</strong> helpfile for further information.<br />
3.2.7 This step is only applicable to <strong>VNWA</strong> 3 (without expansion board)<br />
Select Tab "Audio Level" and check settings 1 to 2 are set as shown below:<br />
Note: Audio Capture Devices may either be shown as “Line” or “Microphone” depending on<br />
type of USB-Codec chip fitted.<br />
<strong>SDR</strong>-<strong>Kits</strong> <strong>VNWA</strong> 3 & <strong>3E</strong> "Getting Started" Manual W7 - XP v2.0 - copyright 2013 by <strong>SDR</strong>-<strong>Kits</strong> Page 12 of 47
Change language