Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
The following is a sample of IPoIB, IPv4, and IPv6 multicast for 0x9001/0x1001
PKey. This can be useful if there are multiple IPoIB vFabrics and different
multicast parameters (Rate, MTU, etc) are desired for each IPoIB vFabric. Since
IPoIB MGID includes PKey, we specify PKey not VirtualFabric. MGIDs specified
must use the Full PKey (0x8000-bit set)
0
0x1001
0xff12401b90010000:0x00000000ffffffff
0xff12401b90010000:0x0000000000000001
0xff12401b90010000:0x0000000000000002
0xff12401b90010000:0x0000000000000016
0xff12601b90010000:0x0000000000000001
0xff12601b90010000:0x0000000000000002
0xff12601b90010000:0x0000000000000016
2048
10g
0x0
0x0
0x0
The parameters in Table 3-9 define the policies and controls for the Multicast
Groups
Table 3-9. Sm Multicast Group Pre-Creation Parameters
Parameter
Default
Value
Description
Create 1 Enables or disables the creation of the
given set of Multicast Groups. This provides
a convenient way to disable a MulticastGroup
section without needing to
delete it from the configuration file
3-28 IB0054608-01 B