Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-2. Shared Parameters (Continued)
Parameter
CS_LogMask
MAI_LogMask
CAL_LogMask
DVR_LogMask
IFS_LogMask
SM_LogMask
SA_LogMask
PM_LogMask
PA_LogMask
BM_LogMask
FE_LogMask
APP_LogMask
Default
Value
0x1fff
Description
For advanced users, these parameters can
provide more precise control over per subsystem
logging. For typical configurations
these should be omitted and the LogLevel
parameter should be used instead.
For each subsystem there can be a Log-
Mask. The mask selects severities of log
messages to enable and is a sum of the following
values:
0x1=fatal
0x2=actionable error
0x4=actionable warning
0x8=actionable notice
0x10=actionable info
0x20=error
0x40=warn
0x80=notice
0x100=progress
0x200=info
0x400=verbose
0x800=data
0x1000=debug1
0x2000=debug2
0x4000=debug3
0x8000=debug4
0x10000=func call
0x20000=func args
0x40000=func exit
For Embedded SM corresponding Chassis
Logging must also be enabled and Sm configuration
applies to all managers
For Host SM, the linux syslog service will
need to have an appropriate level of logging
enabled.
3-10 IB0054608-01 B