Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

3–Fabric Manager Configuration
Configuring the QLogic Fabric Manager
Table 3-2. Shared Parameters (Continued)
Parameter
CoreDumpDir
Priority
ElevatedPriority
Default
Value
/var/crash
/qlogic_fm
0
0
Description
Directory to dump to. A unique file will be
created for each core file per the standard
linux kernel configuration This directory will
be created, but its parent directory must
pre-exist.
For the Embedded FM, this parameter is
ignored.
Default parent directory of /var/crash/ may
not exist on some systems. Make sure to
create this directory or use an appropriate
existing directory name before enabled FM
core dumps.
The startup priority of each manager in this
Fm Instance. 0-15 is allowed. Priority and
Elevated Priority control failover for SM, PM
and BM. Priority is used during initial negotiation,
high Priority wins. ElevatedPriority is
assumed by the winning master. This can
provide sticky failover and prevent fallback
when previous master comes back online.
LogLevel 2 Sets log level option for SM, PM, BM and
FE:
0 = disable vast majority of logging output
1 = fatal, error, warn (syslog CRIT, ERR,
WARN)
2 = +notice, INFIIINFO (progress messages)
(syslog NOTICE, INFO)
3 = +INFO (syslog DEBUG)
4 = +VERBOSE and some packet data (syslog
DEBUG)
5 = +debug trace info (syslog DEBUG)
This parameter is ignored for the Embedded
Fabric Manager. Consult the QLogic 12000
Chassis User’s Guide for information on
configuring chassis logging options.
IB0054608-01 B 3-7