Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

2–Advanced Fabric Manager Capabilities
SM Loop Test
SM Loop Test Show Topology
# /opt/qlogic_fm/bin/fm_cmd smLooptestShowTopology
Connecting to LOCAL FM instance 0
Successfully sent Loop Test topology show to local SM instance
sm_state= MASTER count= 29796 LMC= 0, Topology Pass count= 4, Priority= 0, Mkey= 0x0000000000000000
-----------------------------------------------------------------------------------------
george HCA-1
-----------------------------------------------------------------------------------------
Node[ 0] => 0079159a00117500 (1) ports=1, path=
Port ---- GUID ---- (S) LID LMC _VL_ __MTU__ __WIDTH__ ___SPEED____ CAP_MASK N# P#
1 0079159a00117500 4 LID=000d LMC=0000 2 1 4k 2k 1X/4X 4X 2.5-10 2.5 0761086a 1 19
-----------------------------------------------------------------------------------------
9024 #0
-----------------------------------------------------------------------------------------
Node[ 1] => 0000000000066a24 (2) ports=36, path= 1
Port ---- GUID ---- (S) LID LMC _VL_ __MTU__ __WIDTH__ __SPEED___ CAP_MASK N# P#
0 0000000000066a24 4 LID=0001 LMC=0000 8 8 2k 2k 1X/4X 4X 2.5/5 5.0 00100848 1 0 1
1 0000000000000000 4 8 8 2k 2k 1X/4X 4X 2.5/5 5.0 00000048 2 1
2 0000000000000000 4 8 8 2k 2k 1X/4X 4X 2.5/5 5.0 00000048 2 2
*
*
*
Figure 2-17. SM Loop Test Show Topology Report Example
SM Loop Test Show Configuration
# /opt/qlogic_fm/bin/fm_cmd smLooptestShowConfig
Connecting to LOCAL FM instance 0
Successfully sent Loop Test configuration show to local SM instance
Loop Test is running with following parameters:
Max Path Length #Packets Inject Point
---------------- ------- ----------------
4 00005 All Nodes
FastMode=0, FastMode MinISLRedundancy=4, InjectEachSweep=1, TotalPktsInjected since start=0
Figure 2-18. SM Loop Test Show Configuration Report Example
IB0054608-01 B 2-41