Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

2–Advanced Fabric Manager Capabilities
SM Loop Test
Reports from SM LoopTest
The following reports can be requested for the SM loop test:
SM Loop Test Show Loop Paths
# /opt/qlogic_fm/bin/fm_cmd smLooptestShowLoopPaths
Connecting to LOCAL FM instance 0
Successfully sent Loop Test Path show for node index (all) to local SM instance
Node Idx: 1, Guid: 0x00066a2400000000 Desc 9024 #0
Node Idx: 2, Guid: 0x00066a2400000003 Desc 9024 #3
----------------------------------------------------------------------------------
Node Node Node Path
Idx Lid NODE GUID #Ports LID PATH[n:p->n:p]
---- --------- -------------------- -------- ------ ------------------
1 0x0001 0x00066a2400000000 36 0x0080 1:1->2:1 2:2->1:2
1 0x0001 0x00066a2400000000 36 0x0081 1:1->2:1 2:3->1:3
1 0x0001 0x00066a2400000000 36 0x0082 1:1->2:1 2:4->1:4
1 0x0001 0x00066a2400000000 36 0x0083 1:1->2:1 2:5->1:5
*
*
*
Figure 2-15. SM Loop Test Show Loop Paths Report Example
SM Loop Test Show Switch LFT
# /opt/qlogic_fm/bin/fm_cmd smLooptestShowSwitchLft
Connecting to LOCAL FM instance 0
Successfully sent Loop Test LFT show for node index (all) to local SM instance
Node[0001] LID=0x0001 GUID=0x00066a2400000000 [9024 #0] Linear Forwarding Table
LID PORT
------ ----
0x0001 0000
0x0002 0001
0x0003 0010
0x0004 0020
0x0005 0021
0x0006 0022
0x0007 0023
*
*
*
Figure 2-16. SM Loop Test Show Switch LFT Report Example
2-40 IB0054608-01 B