Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

C–Mapping Old Parameters
Old SM Parameters
Table C-2. Mapping of Old SM Parameters to New (Continued)
Old Parameter New Parameter Notes
SM_x_log_filter Sm.LogFilter Use of LogLevel is recommended
SM_x_log_file Sm,LogFile —
SM_x_pkey_yy — Removed parameter. yy is 00 to
31
SM_x_disable_mcast_check
SM_x_def_mc_create
SM_x_def_mc_pkey
SM_x_def_mc_mtu
SM_x_def_mc_rate
SM_x_def_mc_sl
SM_x_def_mc_qkey
SM_x_def_mc_fl
SM_x_def_mc_tc
SM_x_log_mask Sm.LogMask Use of LogLevel is recommended
Sm.Multicast.DisableStrictCheck
Sm.Multicast.Multicast-
Group.Create
Sm.Multicast.Multicast-
Group.PKey
Sm.Multicast.Multicast-
Group.Mtu
Sm.Multicast.Multicast-
Group.Rate
Sm.Multicast.Multicast-
Group.SL
Sm.Multicast.Multicast-
Group.QKey
Sm.Multicast.Multicast-
Group.FlowLabel
Sm.Multicast.Multicast-
Group.TClass
—
The new format allows specification
of what MGIDs to create and
can create many MGIDs as
needed
The PKey is optional in the new
format. When omitted an appropriate
PKey will be used
The old format used IBTA constants
(1=256 bytes, 2=512,
3=1024, 4=2048, 5=4096). The
new format allows for direct use
of “natural” values such as 2048.
The old format used IBTA constants
(2=2.5g, 3=10g, 4=30g,
5=5g, 6=20g, 7=40g, 8=60g,
9=80g, 10=120g). The new format
allows for direct use of “natural”
values such as 10g.
The SL is optional in the new format.
When omitted an appropriate
service level will be used
—
—
—
IB0054608-01 B C-5