Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

C–Mapping Old Parameters
Old SM Parameters
Table C-2. Mapping of Old SM Parameters to New (Continued)
Old Parameter New Parameter Notes
SM_x_master_ping_max_fai
l
SM_x_topo_errors_thresho
ld
SM_x_topo_abandon_thresh
old
Sm.MasterPingMaxFail —
Sm.SweepErrorsThreshold —
Sm.SweepAbandonThreshold —
SM_x_switchlifetime Sm.SwitchLifetime The old parameters were
expressed as N with the resulting
time-out being 4.096 * 2^N
microseconds. The new parameters
are expressed in “natural”
format such as 33ms or infinite.
Values will be rounded up as
needed.
SM_x_hoqlife Sm.HoqLife The old parameters were
expressed as N with the resulting
time-out being 4.096 * 2^N
microseconds. The new parameters
are expressed in “natural”
format such as 33ms or infinite.
Values will be rounded up as
needed.
SM_x_vlstall Sm.VlStallCount —
SM_x_saRespTime Sm.SaRespTime The old parameters were
expressed as N with the resulting
time-out being 4.096 * 2^N
microseconds. The new parameters
are expressed in “natural”
format such as 33ms. Values will
be rounded up as needed.
SM_x_saPacketLifetime Sm.PacketLifetime The old parameters were
expressed as N with the resulting
time-out being 4.096 * 2^N
microseconds. The new parameters
are expressed in “natural”
format such as 33ms. Values will
be rounded up as needed.
SM_x_dbsync_interval Sm.DbSyncInterval —
SM_x_trap_threshold Sm.TrapThreshold —
IB0054608-01 B C-3