Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

C
Mapping Old Parameters
Versions of the QLogic Fabric Manager prior to version 4.4 used a different
configuration file format (iview_fm.config). Table C-1 provides a mapping of
parameter names in the old file to the new file (qlogic_fm.xml). Refer to
Section 3 for more information about the xml configuration file format.
Parameters in the old format included the instance number in their name, for
example sm_0_hca. These are shown as sm_x_parameter in the following
tables.
The section names are shown as part of the new parameter. The
Shared.SubnetSize indicates the SubnetSize parameter within the Shared
section.
NOTE:
When performing an upgrade installation of the QLogic Fabric Manager, the
existing iview_fm.config will be translated to create a new
qlogic_fm.xml configuration file. The user will have the option to retain
this translated upgrade or use the new qlogic_fm.xml-sample file as the
default. Consult the QLogic Fabric Software Installation Guide for more
information. If required, the config_convert utility can also be used to
convert existing iview_fm.config files into the qlogic_fm.xml
configuration file format.
Old Global Parameters
Table C-1. Mapping of Old Global Parameters to New
Old Parameter New Parameter Notes
IVIEW_FM_BASE — Removed parameter
ENV_OVERWRITE — Removed parameter
HARDWARE_TYPE — Removed parameter
START_AFTER_ERROR — Removed parameter
IB0054608-01 B C-1