Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
sm_process_vf_info: Virtual Fabric VF0013 MulticastGroup configuration error, mismatch
on pkey. Disabling Default Group
SM Area: Administrator.
Meaning: The MulticastGroup linked to this Virtual Fabric do not share a
common pkey. Disabling the mcast group for this vFabric.
Action: Configuration change required if mcast group default creation is
needed.
sm_process_vf_info: Virtual Fabric VF0013 MulticastGroup configuration error, mismatch
on mtu/rate. Disabling Default Group
SM Area: Administrator.
Meaning: The Multicast Group has mtu/rate configured higher than the max
mtu/rate configured for the Virtual Fabric.
Action: Configuration change required if mcast group default creation is
required.
sm_initialize_port/sm_dbsync: cannot refresh sm pkeys
SM Area: Administrator.
Meaning: An internal error occurred when attempting to refresh the SM
Pkeys.
Action: Contact customer support if condition persists.
sa_ServiceRecord_Add: Failed to ADD serviced record ID=0x1000000000003531 from lid
0x2 due to invalid pkey
SM Area: Administrator.
Meaning: Serviced record add failure due to request with invalid PKey
Action: Configuration change required if request should be granted.
sa_ServiceRecord_Add: Failed to ADD serviced record ID=0x1000000000003531 from lid
0x2 due to pkey mismatch from request port
SM Area: Administrator.
Meaning: Serviced record add failure due to request with PKey not shared by
requestor
Action: Configuration change required if request should be granted.
sa_ServiceRecord_Add: Failed to ADD serviced record ID=0x1000000000003531 from lid
0x2 due to pkey mismatch from service port
SM Area: Administrator.
Meaning: Serviced record add failure due to request with PKey not shared by
requestor
Action: Configuration change required if request should be granted.
IB0054608-01 B B-31