Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
sa_McMemberRecord_Set: Port GID in request
(0x0080000000000000:0x0000000000000000)from Hca1, Port
0x00066a00d9000143, LID 0x1 has a NULL GUID/invalid prefix, returning
status 0x0500
SM Area: Administrator.
Meaning: Invalid data in the SA request.
Action: Check the health of HCA1.
sa_McMemberRecord_Set: MTU selector of 2 with MTU of 4 does not work with port MTU
of 1 for request from compute-0-24, Port 0x00066A00A00005C5, LID 0x009C,
returning status 0x0200
SM Area: Administrator.
Meaning: The requester port data is not compatible with the group data.
Action: Create group at lowest common denominator or host should join
with rate selector of “less than” rather than “exactly”.
sa_McMemberRecord_Set: Rate selector of 2 with Rate of 3 does not work with port Rate
of 2 for request from compute-0-24, Port 0x00066A00A00005C5, LID 0x009C,
returning status 0x0200
SM Area: Administrator.
Meaning: Node compute-0-24 has requested a port rate that is incompatible
with the group rate.
Action: Check that the requester port is not running at 1X width or that the
multicast group was not created with a rate greater than what some
the host ports can support.
sa_McMemberRecord_Set: Component mask of 0x00000000000XXXXX does not have bits
required (0x00000000000130C6) to create a group for new MGID of
0xFF12401BFFFF0000:00000000FFFFFFFF for request from Hca1, Port
0x00066a00d9000143
SM Area: Administrator.
Meaning: End node may be trying to join a group that does not exist.
Action: OpenIB and Sun stacks require that the broadcast group be
pre-created by the SM.
sa_McMemberRecord_Set: Component mask of 0x0000000000010083 does not have bits
required (0x00000000000130C6) to create a new group in request from Hca1,
Port 0x00066a00d9000143
SM Area: Administrator.
Meaning: Specific bits must be set in a CREATE group request.
Action: The requester is violating the InfiniBand specification.
IB0054608-01 B B-27