Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
Failed to init VL Arb (setting port down) on node Hca1/Sw1 nodeGuid
0x00066a00d9000143 node index X port index Y
SM Area: Discovery.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric. Persistence indicates that the node may be having
problems.
Action: Check the health of node Hca1/Sw1 if the fabric was idle or
persistent condition.
TT(ta): can't ARM/ACTIVATE node Hca1/sw1 guid 0x00066a00d9000143 node index X port
index Y
SM Area: Discovery.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric. Persistence indicates that the node may be having
problems.
Action: Check the health of node Hca1/Sw1 if the fabric was idle or
persistent condition.
sa_xxxxx: Reached size limit at X records
SM Area: Administrator.
Meaning: The response buffer is too large.
Action: Contact support.
sa_NodeRecord_Set: NULL PORTGUID for Node Guid[0x00066a00d9000143], Hca1, Lid
0x1
SM Area: Administrator.
Meaning: Possible data corruption.
Action: Contact support.
sa_TraceRecord: destination port is not in active state; port LID: 0x1 (port GUID
0x00066a00d9000144)
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric.
Action: Check the health of the destination if the condition persist.
IB0054608-01 B B-25