Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
sm_setup_node: Get NodeDesc failed for local node, status 7
SM Area: Discovery.
Meaning: The SM cannot communicate with the stack.
Action: If the condition persists, restart the SM node.
Error adding Node GUID: 0x00066a00d9000143 to tree. Already in tree!
SM Area: Discovery.
Meaning: Duplicate Node GUID in fabric.
Action: Using fabric tools, locate the device with the duplicate node GUID
and remove it.
Error adding Port GUID: 0x00066a00d9000143 to tree. Already in tree!
SM Area: Discovery.
Meaning: Duplicate Port GUID in the fabric.
Action: Using fabric tools, locate the device with the duplicate port GUID
and remove it.
Duplicate NodeGuid for Node Hca1 nodeType[1-3] guid 0x00066a00d9000143 and existing
node[x] nodeType=1-3, Hca2, guid 0x00066a00d9000143
SM Area: Discovery.
Meaning: A duplicate Node Guid in fabric.
Action: Using fabric tools, locate the device with the duplicate node GUID
and remove it.
Marking port[x] of node[x] Hca1 guid 0x00066a00d9000143 DOWN in the topology
SM Area: Discovery.
Meaning: port x of HCA1 is not responding.
Action: Check the health of node HCA1.
Failed to init SLVL Map (setting port down) on node Hca1/sw1 nodeGuid
0x00066a00d9000143 node index X port index Y
SM Area: Discovery.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric. Persistence indicates that the node may be having
problems.
Action: Check the health of node Hca1/Sw1 if the fabric was idle or
persistent condition.
B-24 IB0054608-01 B