Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
sa_ServiceRecord_GetTable: Filter serviced record ID=0x1000000000003531 from lid 0x4
due to pkey mismatch from request port
SM Area: Administrator.
Meaning: PKey validation failed for service record, request node does not
have valid pkey.
Action: Configuration change required if request should be valid.
sa_xxxxxx: too many records for SA_CM_GET
SM Area: Administrator.
Meaning: May have duplicate data in the fabric.
Action: Check topology data for duplicate GUIDs.
sa_TraceRecord/Pathrecord_set: Cannot find path to port 0x00066a00d9000144 from port
0x00066a00d9000144: LFT entry for destination is 255 from switch Sw1
(nodeGuid 0x00066a00d9000999)
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric.
Action: Check SW1 for a bad port and health of the destination node if the
condition persists.
sa_TraceRecord/Pathrecord_set: Cannot find path to destination port
0x00066a00d9000144 from source port 0x00066a00d9000143; INVALID
TOPOLOGY, next/last_nodep is NULL
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric.
Action: Check SW1 for a bad port and health of the destination node if the
condition persists.
sa_updateMcDeleteCountForPort: MC Dos threshold exceeded for: Node= HCA1,
GUID=0x00066a00d9000143, PortIndex=1; bouncing port.
SM Area: Administrator.
Meaning: SM Multicast denial of service configured and threshold has been
reached. Bouncing the port in attempt to clear issue.
Action: If multiple occurrence, check health of node HCA1.
B-22 IB0054608-01 B