Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
sa_PathRecord_Set: Cannot find path to port 0x00066a00d9000144 from port
0x00066a00d9000143: failing vFabric serviceId validation
SM Area: Administrator.
Meaning: A path record request was made for a given serviceId. The source
and destination do not share a vFabric that contains an application
with the given serviceId.
Action: Configuration change required if they should have access.
sa_PathRecord_Set: Cannot find path to port 0x00066a00d9000144 from port
0x00066a00d9000143: failing vFabric rate validation (mtu=2,rate=3)
SM Area: Administrator.
Meaning: The source and destination do not share a path in a vFabric that
contains limitations on max mtu and rate.
Action: Configuration change required if path is valid.
sa_PathRecord/SA_TraceRecord: Failed PKey check for src, input PKey is 0x800d
SM Area: Administrator.
Meaning: A request was for given pkey, but source of query is not a member
of the same partition.
Action: Configuration change may be necessary.
sa_PathRecord/SA_TraceRecord: Failed pairwise PKey check for request
SM Area: Administrator.
Meaning: A query request failed pairwise pkey checks.
Action: Configuration change may be necessary.
sm_process_vf_info: Virtual Fabric VF0011 has undefined pkey. Changing pkey value to
0x3.
SM Area: Configuration
Meaning: A vFabric with an undefined pkey has been assigned a pkey.
Action: None.
sm_process_vf_info: Default PKey not being used by Default Virtual Fabric (configured as
0x8001). Changing pkey value to default 0x7fff
SM Area: Administrator.
Meaning: The Default Virtual Fabric was configured with a non-default pkey.
Changing the pkey to the default.
Action: None.
IB0054608-01 B B-21