Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
Get NodeInfo failed for node off Port x of Node 0x00066a00d9000143:Hca1, status=7
SM Area: Discovery.
Meaning: The node connected to port x of HCA1 is not responding.
Action: Check the health of the node connected to the port.
Get NodeDesc failed for node off Port X of Node 0x00066a00d9000143:Hca1, status = 7
SM Area: Discovery.
Meaning: The node connected to port x of HCA1 is not responding.
Action: Check the health of the node connected to the port.
Failed to get Switchinfo for node sw1 guid 0x00066a00d9000143: status = 7
SM Area: Discovery.
Meaning: Switch node 1 is not responding.
Action: If the condition persist, check the health of the switch and capture
health data if possible.
Failed to set Switchinfo for node sw1 nodeGuid 0x00066a00d9000143: status = 7, port
mkey=0x0, SM mkey=0x0
SM Area: Discovery.
Meaning: Switch node 1 not responding.
Action: If the condition persist, check the health of the switch and capture
health data if possible.
Failed to get PORTINFO from port 1 of node [x] Hca1; Marking port Down!
SM Area: Discovery.
Meaning: Port x of HCA1 not responding.
Action: Check the health of node HCA1.
Failed to init switch-to-switch link from node [x] sw1 guid 0x00066a00d9000143 port index
X to node [x] sw2 guid 0x00066a00d9000144 port index Y which was
reported down
SM Area: Discovery.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric.Persistence indicates a possible bad inter-switch cable or
malfunctioning leaf or spine switch component.
Action: If the situation persist, perform a health check on the 2 switch
ports. Replace the cable or switch component.
IB0054608-01 B B-17