Fabric Manager Users Guide, Version 6.1, Revision A - QLogic

B–QLogic Fabric Manager Log Messages
Other Log Messages
0xFF12401BFFFF0000:00000000FFFFFFFF can't be found or not active in
current topology, returning status 0x0001/0x0200
SM Area: Administrator.
Meaning: May be caused by simultaneous removal/insertion events in the
fabric or request received from the node that the SM has dropped
from the fabric due to the non-response to SMA queries.
Action: Check health of node at lid 0x0001 if fabric is stable.
sa_McMemberRecord_Set: Last full member left multicast group GID
0xFF12401BFFFF0000:00000000FFFFFFFF, deleting group and all members
SM Area: Administrator.
Meaning: Group is cleaned out when last the FULL member leaves.
Action: None.
Warning (WARN)
xxx Mismatch smKey[0x1] SMInfo from node Hca1 with, lid[0x1], guid
0x00066a00d9000143, TID=0x811E796027000000
SM Area: SM to SM Communication.
Meaning: The SMkey reported by the 2 SMs does not match.
Action: Reset the smkey on one of the subnet managers and restart.
failed to send reply [status=x] to SMInfo GET request from node Hca1 guid
0x00066a00d9000143, TID=0x811E796027000000
SM Area: SM to SM Communication.
Meaning: Lost communication path to other SM on node HCA1.
Action: Check the health of the node described in the message and status
of the SM node.
failed to send reply [status=x] to SMInfo SET request from node Hca1 guid
0x00066a00d9000143, TID=0x811E796027000000
SM Area: SM to SM Communication.
Meaning: Lost communication path to the other SM on node HCA1.
Action: Check the health of the node described in the message and the
status of the SM node.
SmInfo SET control packet not from a Master SM on node Hca1, lid [0x1], guid
0x00066a00d9000143, TID=0x811E796027000000
SM Area: SM to SM Communication.
Meaning: The SM on node HCA1 is violating the InfiniBand spec protocol.
Action: If the condition persist, turn off the SM on node HCA1.
B-14 IB0054608-01 B